|
|
Always used, small projects as a base to create new project, replacing photos, titles etc ...
In PD12 never had problems.
In PD13 sometimes show pictures of previous project on the timeline, but the final video is right.
This Project is all right in the library, the timeline and the saved file.
After saving project and reopen.
My Surprise, when saving to video file I have pictures from another project that is not even that I used based.
I searched for all workbooks and did not think the pictures, I thought of deletalas or renomer.
Is there something I do not know about?
Attached image shows one picture, but all were exchanged.
Note: I had to redo this post because the forum or chrome with this translate into my language automatically sometimes I do not understand.
The previous forum that did not happen.
|
|
|
Was using PowerDirector 13 beta patch v2725.
Worked fine until I updated to PowerDirector 13 beta patch v2808.
Project loading with many video files, achegava 80% stopped for a long time after finalizing however everything was very slow and even stall everything and have to give Ctrl + Alt + Del to close PD13.
Returned to v2725 and remains the same.
Returned to v2604 and contunua the same.
New installation clean and updated to v2604.
Worked well here.
Today I again upgrade to v2725 have back the locking problem loading project from 80%...
Returned to v2604 and it seems fine now.
Someone else has this problem?
|
|
|
The way I do, click on the title of the border, appears to double arrow, hold and drag to get the size that you want, release and is given the options, select trim only.
Note: To change the title size is shown duration, last line.
|
|
|
Moorish
Seeing your posting I decided to check here on my recent ATI R9 270, not active for HA (H265) HEVC options.
Works great for XAVC S'll probably use this for temporary files in HD or FullHD.
Works also for H264 - AVC and WMV only to fullhd above not active HA. (for all)
|
|
|
I've never used PD. caprura for video.
But I understand that the audio captured in only one channel, you can copy this channel to another channel to have the 2 L and R channels with audio.
Editing in the timeline use WaveEditor to do so.
View this video clip.
https://www.youtube.com/watch?v=WLpQGbKcrM8
|
|
|
You can add more than one audio track to your project in PD13, then save to file Produce has only 2 audio channels.
The timeline shows only one wave
Not sure if AudioDirector do what you want, it has multichannel.
|
|
|
[Quote = Jamesd1] Ao usar um arquivo AVI, descobri que as miniaturas de linha do tempo não são coorelated com a visualização de vídeo. I pode clicar em uma parte do vidoe na linha do tempo e, em vez de refletir que na pré-visualização, como de costume, ele me mostrar uma parte diferente do vídeo na visualização. Eu já não ver o mesmo problema com outros tipos vidoe tais como mpeg. Executando o Windows 7, atualizado, com 8 Mb de memória.
I think yours is the same happens to me sometimes to any video format.
It happens more when we make cuts in the video and leave gaps left in the timeline, if we remove the gaps should solve the problem.
If you can confirm that this resolves for you.
example: I see the video image deleted where it should show the current video.
Besides his case can also happen lack of audio or black image (no image)
|
|
|
! [Quote = Sakiskid] Olá eu tinha gravado um vídeo que tem duas faixas de áudio - uma para áudio do jogo e outro para voz. O problema é quando eu carregar o vídeo para Director de Energia é que ele mostra apenas uma única faixa de áudio. Eu não posso ouvir a minha voz e eu só posso ouvir o jogo. Existe alguma maneira de mostrar várias faixas de áudio? Obrigado
Not sure if I understand right.
1 - If you saved your project video, postriormente add this video in PD13 has only one audio (2 audio tracks were mixed in a)
2 - If you reopen your project and shows no or not hear the 2 audio tracks, can be PD error.
If you post a PrintScreen of your timeline we can better analyze your problem.
|
|
|
|
Try Chroma Key in Pip Designer, works well to remove solid color.
|
|
|
|
Quote:
Changing a previous crossfade messed up the later ones
Here happens that too.What do I do to fix this, after completing the project, save and reopen the project, fix this problem.Currently I always use this procedure to solve this problem of transition.
|
|
|
|
Quote:
If you are using a variable bitrate you may want to try a constant bitrate. I believe it is CBR.
Thanks for answeringBecause of momentary instability this topic was doubled, only now I see.
See the correct topic, http://forum.cyberlink.com/forum/posts/list/43374.page
|
|
|
|
delboy35 and ynotfishThank you for taking the tests now know it's not my PC.
I agree that the bitrate varies according to the complexity of the image.
Curious that even used bita rate fixed CBR 9kbps.
I still have this difeneça.It is but pronounced for FullHD files created in PD13.
Another created in Proshow bitrate was 9k1 bps.
2 video clip was slide photos with movement and transition, quality 1920x1080 x 16 Kbps.
I did in PD12 and was the same.I consider my doubts resolved.
Thank you
|
|
|
|
= markmanxp
I have this problem and already posted here more than once, niguém manifested about.
In my case is only for projects with many files, my projects usually have more than 100 video files.
The way I do, if you do not know which profile that will match.
I add only one file on the timeline, intelligent SVR shows me the appropriate profile when you have, or produce I try to create a personal profile.
Unfortunately not the analize to make the project complete, absurd delay.
|
|
|
In search of the best image quality I use maximum bitrate for MPEG2, I have noticed the video after rendering shows a bit rate lower than the personal profile.
Does anyone have this problem, have a suggestion how to solve.
See image.
Thank you.
|
|
|
In search of the best image quality I use maximum bitrate for MPEG2, I have noticed the video after rendering shows a bit rate lower than the personal profile.
Does anyone have this problem, have a suggestion how to solve.
See image.
Thank you.
|
|
|
[Quote = Antonio1951] Obrigado por sua ajuda com isso. Você salvou meu dia. Talvez você possa ajudar com alguma coisa que eu não estou certo sobre. Quando eu colocar este na linha do tempo que diz que é 4.3 relação de aspecto e perguntar se eu quero mudar isso. Se eu quiser adicionar este a um Projest salva que é de 16,9 o que devo fazer. Haverá apenas uma pequena parte que eu vou estar usando a partir deste arquivo.
Confirm OK OK PD. change aspect ratio compatible with the video in the case 4x3.
If you want to create a DVD 16x9, 4x3 for video, is added black bars on each side of the image.
I when edict from copied DVD VHS or MiniDV tape.Enable SVRT for PD not render the video that is already on the DVD standard, whenever possible.If you apply filters, resizing etc ... no way will have to render the video.
Talves need to create a personal profile for your video, here I have two profiles escíficos Video Interlaced UP (VHS) and other Interlaced DOWN (MiniDV)
|
|
|
And I said never worked well here, but this was to MPEG2 to MPEG4 (MP4) works and even slightly reduces the time spent and also generates a smaller file.
The last update ATI radeon (Omega) improved in general and disabled HE for MPEG2 in Produce room.
|
|
|
PD13 and its basic packages already installed all or almost all Cyberlink material.
What can you miss your, personal materials.
These you should have copied this location.
C: \ Users \ "your pc name" \ Documents \ CyberLink
Download materials DirectorZone.
C: \ Users \ Public \ CyberLink
|
|
|
I am glad that solve your problem.
Hardware acceleration has to do with the video rendering.
Here is always off, never worked well with my signature video card.
|
|
|
Try to save your disk in a folder on the hard drive.
If it gives some error writing and is trying to re-record point to new folder or delete the folder you created earlier.
Just guess no certainty that it will solve.
Getting your disc in a folder, you can try again straight to disk or burn DVD from Video-Ts folder with other sofware DVD recording.
|
|
|
In Create Disc.Content + add the video file.
Preferences menu, select a menu or No menu.
2D disc, DVD, 16: 9 HQ - Best Quality
Burn in 2D, Burn to Disc (Record direct to DVD)
PD must be configured to PAL, will convert the FullHD video to DVD automatically.
|
