|
|
Hello,
My light version of power director comes with only 3 slideshow creator transitions and the full version comes with 10. Can someone create the same ones for me so I can d/l them and use them.
Thanks
|
|
|
Hello,
I currently have power director version 10 pre installed with windows 8.1 os on my computer. I went to the directzone website and created a login account with no problem and I then d/l the following file:
The end spotlight
Type: Titles
Styles: General
Aspect Ratio: 16:9
Available for power director 12,11,10,9,8,7
When d/l was complete I do see the spotlight.dzt file on my hard disk but per instruction it says that I should double click on the file on my hard disk and it will automatically uploaded to my power director program which it does not. I also made sure that when the main power director 10 program opens up that the aspect ratio is set to 16.9 to match the file to be uploaded and I also tried to import the file where it was stored on my hard disk but it seems that it is a hidden file and can’t find it.
What do I have to do to make this work.
|
|
|
Hello,
Just wondering I email tech support awhile ago and was wondering how long does it usually take to get a response.
Thanks
|
|
|
Hello,
Per your power director 10 user manual it mentions the following:
Extra Information: If your computer is running on a 32 bit operating
system, you can only see three resolution options (Low Preview
Resolution, Normal Preview Resolution, and High Preview
Resolution) in the pop-up menu. However, if your system is running on a
64 bit operating system, you will see two additional resolution options: HD
Preview Resolution and FULL HD Preview Resolution.
Media Viewer
I am running a 64 bit why am I not able to use the other use the hd preview resolution and full hd preview resolution which is grayed out with version le 10.0.0.2810
|
|
|
Hello,
I have a couple of questions that someone might be able to help me out with the slideshow creator.
1. I am currently using power director 10 le 10.0.0.2810 and would like to know is there away I can import some transitions in the slideshow creator if so how.
2. My le version for the slideshow creator came with only 3 transitions and after searching directzone for the 10 transitions which comes with the full version I was unable to find it. Does anyone have those transitions that I can use.
|
|
|
Hello,
I currently have a new computer with cyberlink software is preinstalled. What are the advantages and disadvantages if I register the software or not.
|
|
|
Hello,
I am currently using photo director 3 le 3.01.4107 and have a project name tom. In this project I have one folder called family with a bunch of pictures. I then created a slideshow with these photos and it worked with no problem.
I next imported a new folder called vacation with a bunch of photos now when I go to my slideshow option on my upper screen I see all my previous photos from my family photo and the bottom screen I see the new photos of my vacation folders.
How does one create a new slideshow of just the new photos in the bottom of the screen vacation photo without including the previous family photo which is in the upper screen.
|
|
|
|
Quote:
Hello,
I currently have power director version 10 le v10.0.0..2810 pre installed with windows 8.1 os on my computer. I went to the directzone website and created a login account with no problem. I then d/l the following file:
The end spotlight
Type: Titles
Styles: General
Aspect Ratio: 16:9
Available for power director 12,11,10,9,8,7
When d/l was complete I do see the file in my directzone account and the spotlight.dzt file on my hard disk. Per instruction it says that I should double click on the file on my hard disk and it will automatically uploaded to my power director program which it does not.
I also made sure that when the main power director 10 program opens up that the aspect ratio is set to 16.9 to match the file to be uploaded and I also tried to import the file where it was stored on my hard disk but it seems that it is a hidden file and can’t find it.
What do I have to do to make this work.
Problem resolved
|
|
|
Hello,
I currently have power director version 10 le v10.0.0..2810 pre installed with windows 8.1 os on my computer. I went to the directzone website and created a login account with no problem. I then d/l the following file:
The end spotlight
Type: Titles
Styles: General
Aspect Ratio: 16:9
Available for power director 12,11,10,9,8,7
When d/l was complete I do see the file in my directzone account and the spotlight.dzt file on my hard disk. Per instruction it says that I should double click on the file on my hard disk and it will automatically uploaded to my power director program which it does not.
I also made sure that when the main power director 10 program opens up that the aspect ratio is set to 16.9 to match the file to be uploaded and I also tried to import the file where it was stored on my hard disk but it seems that it is a hidden file and can’t find it.
What do I have to do to make this work.
|
|
|
Hello,
I am currently using photodirector 3 version 3.0.1.4107 which was pre installed on my new computer. Right now the when I open photodirector 3 is see about 10 pictures on the right side and on the left it says 10 all folders and the project name tom. What I would like is this:
On my d drive I have separate folders called as a example trip1 trip2 trip3 with various pictures inside the folders. I would like to import these folders with all the pictures and have these folders with pictures all separate and not showing up in the all photos folders all under the project tom so I can make individual changes anytime.
ex: Project tom (kind of like a root directory) under the root directory have separate folders with pictures trip1 trip2 trip3
tom
Trip1 (folder)
Trip2 (folder)
Trip3 (folder)
?Can someone show me step by step how this can be down and if any current customers have some nice and fancy vacation slideshows trips using either photodirector 3 or powerdvd 10 can they provide me a url?
Thanks for your help
|
|
|
Hello,
I am currently using a old version of photodirector 3 verson 3.0.1.407 software which came loaded with the new computer. I have a a questions that someone might be able to explain to me.
1. Currently when I start photodirector 3 on the left side it shows a project name tom. Under the project it says 10 on the left side in the all photos and shows 10 photos on the right which is ok.
When I import my 20 new photos using any of your import option it always combines (which cyberlink calls this the all photos folders) the new into the all photo folder.
a) If I just want to keep my project named tom and import my photos in a separate folder named say trip without combing it to the preinstalled photos how can this be done?
If someone has a couple of nice and fancy examples of vacation traveling slideshow using this software I would appreciate if they can post a url.
Thank you
|
|
|
Hello,
Thanks for your reply I have done this already and guess what they said," Contact cyberlink".
|
|
|
|
delete
|
|
|
Thanks for your reply. When I click on the about all I get is the following:
Camera man
V 1.0.1.227.28790
@2013 Lenovo
All rights reserved
Powered by Cyberlink
Maybe cyberlink wrote a special program just for Lenovo customers and there computers which is why the user manual is not available for anyone.
|
|
|
Hello,
Since I don't know where to post this you are welcome to move this thread to the appropriate group. I currently purchased a computer with some pre-installed software from cyberlink. All of which when going to your website has user manual except one camera man which I am unable to find anywhere.
When I go to the about info it mentions that it is cyberlink v 1.0.1.227.28790. Can someone provide me a url where I can d/l the user manual.
Thank you
|
|
|
Hello,
I am currently using the Photo Director 3.0.1.4107 LE which was pre installed on my new laptop computer. I accidently deleted one of those pre-install .psd files and would like to know how to get it back. I have done a search on my computer for the .psd and could not find it.
Any help would be appreciated.
Thanks
|
