|
|
Nota:
CyberLink Power2Go Create a full backup of your Windows system and the data on your system drive
Mount a disc image as a virtual drive and conveniently treat it like a real disc drive
I record of "ISO" image file with in Nero, option, Recorder / Burn Image or Right Click / Open with / Nero Burning ROM
This option record the disc in original format
I PD13, create ISO image file, but not write from the image ISO.
You can also record your disk in a folder or directly to DVD or BD disc in PD13.
Other members can give you more details about the Imagburn.
|
|
|
[Quote = bgraziose1] ou eu vou ter que começar de novo? Obrigado. [/ Quote]
Surely, you will need cleaned first 5 seconds that contains the text Cyberlink
|
|
|
[Quote = Morvack] Estou usando mp4 não mov. Vou tentar diferentes tipos de arquivo e ver o que acontece graças: D. O que é o pacote de codecs K-lite? [/ Quote]
PD13 supports many video and audio formats, but it can happen one that he did not support yet.
In this case the Codecs package can solve.Only install in the latter case.
If download careful installers who install a lot of junk in our PC without our consent.
http://www.free-codecs.com/k_lite_codec_pack_download.htm
|
|
|
This update wiped all my personal settings, "preferences" as if it were a new installation.
Solved a problem with opacity of some particles, personal effects.
I still have problem with SVRT analyze extremely time consuming, for projects with very segments.
|
|
|
Here I had this problem in the audio when added video in MOV format in a camcorder.
What decided me was to install K-lite Codec Pack.
Only a possibility, in my case did not show the wave in the audio track.
|
|
|
This problem is even for any small project or is only with this current?
Its design has many effects and text in the timeline?
If so will turning off track by track to see what this is located causing the problem.
Here's what weighs heavily on the issue, is over text length and with great content.
|
|
|
[Quote = O Shadowman] Hi novamente Se eu tiver um clipe em cada uma das 20 faixas que posso alinhar os clips para a direita? Se sim, como, por favor Obrigado [/ quote]
As I did the test.
1 - Added 10 track
2 - Added 10 clips in PD library.
3 - 1 dragged by 1, one in each track.
4 - I used the clip as long as a reference.
5 - I dragged each clip aligns to the right with the largest clip.
Note: When the clip is aligned PD already pulls him to exact position.
|
|
|
I did a simulated here to be sure of what I had suggested.
Added 10 video clips, MTS 1080P, in numerical order made by the camcorder.
More work is to add each clip in a track and align right.
Returned 4 or 5 frames brings forward, to eliminate any errors at the end.
Ctrl + A to select all the clips on the tracks.
Split to cut, DEL to exclude all end clips once.
Ctrl + A to select all the clips on the tracks.
Button, Sync by Audio, PD positioning clips in sequence, I think using alphabetical or date order.
Works perfectly.
Note: As with many PD video clips becomes slow but will depend on the PC power handling up to 100 track.
|
|
|
|
This makes for any video?Only with video of the same provenance?What is the profile of your original video?In the latter case I would try to save the video to the same standard or what you think your PC works best, you can not connect SVRT, hence will not change the original profile.
|
|
|
I have no way to show where the PD was saved files on your PC, I always switched to a single folder that I have all of Cyberlink, the 2nd HD.
When you open the manager clicks the Open File Location button, see if this selected the default location.This is where I change to a new location but accessible.
See image.
|
|
|
|
Quote:
I have expanded the timeline and removed the clips, (Title, background and music) to see if anything was obstructing the movement. There is nothing left behind or anything that I can see that would cause this to happen. Does anyone have a suggestion on what would cause the curser to jump ahead or skip secenes?
Try to lower the quality of preview.
|
|
|
| Nothing on the cyberlink web site about that particular version that I purchased, link that I was sent in the email does not work, downloader does not work, takes me to version 13 which I did not purchase. Did I purchase the wrong version? I've been using this for about 2 years but had to reinstall it, and now it's gone. why can't I just save the program on my computer? |
Have you ever tried to contact Cyberlink support.
http://www.cyberlink.com/support/contact-support.jsp
Note: The download manager Cyberlink has option to save the files in a folder of your choice.
|
|
|
|
Eu não segui tudo isso post, talves eu vou repetir o que já foi pensado shown.My é sobre a placa de vídeo que tem tudo a ver com a formação da imagem, cor etc ... Faça uma instalação limpa do placa de vídeo com drivers atuais e deixe a configuração padrão.
|
|
|
A thought adding 20, 30 or more clips, one each on each track to align all right.All selected track, Split some pictures for all at once.After all aligned on a track.Repeat for more clips, is a lot of work, I think it is less than one by one.I think one Overlap 0:16 s transition. works well for me, when filming is good.
After I post this.I checked here and my PD13, lost the clip's alignment altoajuste capacity on the same track and between track. I hope it is temporary.
Resolved, I had cleared the Enable box to snap clips in timeline in Settings / Preferences
|
|
|
|
Quote:
Hi all
I have purchased a zoom controller which works very well except, when I press the "stop record" button the sound is picked up by the camera.
If, say, I have 100 clips in a project, all with this "click" on the end, is there any way I can trim the last couple of seconds off all the clips at once?
Any ideas will be greatly appreciated.
Thanks
If you use transition between the clip, add transition mode overlap 1 s. or less should solve.Make test if it works, you apply Overlap transition to all clips at once.
|
|
|
Atualizações PowerDirector 13 para construir 2.604 http://www.cyberlink.com/support/powerdirector-ultra/patches_en_US.html
Can not settle for project saved before.in this case select the photo in the timeline, button, Modify mark Fades box
|
|
|
|
Quote:
I have an unproduced project in the timeline and I want to merge another unproduced project as my Introduction, but when I click to open my introduction project and click yes to merge the indroduction, my video disappears from the timeline and the introduction project is now in the time line.
How do I get both completed projects on the time line at the same time?
With the project open in PD13, add another project in the option File / Insert Project ...Will be added in the position you put cursor on the timeline.
If you want to use parts of a project to another, select whatever use the Copy / Paste
|
|
|
|
Quote:
Hello all.
I am not sure what is going on but for some reason when import certain videos, they flicker like the shadows and other colors just change about every 1 second. I thought that maybe it was just the preview but nope, even when I produce the outcome is the same. Thank you anyone!!!!
I just downloaded PD13 just FYI.
My guess that can be a problem with your PC.If you post the original video can check on our PC, and if the PD case be causing this effect, try to find a solution.
|
|
|
Here I posted a picture, I added the link, the image appears on anticipated but not after sending.
2 - Now the post is being automatically translated into my language (Portuguese) which does not help at all and still gathers all the words without space and lines.It would be better as before maintain the standard language English.
3 - Now also does not accept typing.I used Ctrl + V works well.
It seems they are working on modifications, now has differences compared to what was in the morning
|
|
|
[quote] How do you save a custom transition? Are these really transitions That You create from scratch?Also, is it possible to change the settings of the Favorite transition so que these settings stay stored along with it?Thanks [/ quote]
We can create or modify Alpha transitions.These will take time to set this in the settings, PD. Can be changed in the timeline one by one or in selected group.Memorize the last setting used especially for transitions.Send suggestions for Cyberlink has a specific topic set up there.The more requests but chance of being met.
|
|
|
|
Quote:
I think you miss my point. I double click. Then, instead of getting a successfully imported message, NOTHING happens. However, if I'm importing something else (like a title or a DVD menu), then it works!
Any thoughts?
Installing alpha transition DZTR and in the same way as for other purposes.
If this with PD already open in the corresponding room is shown the effect immediately.
As I said has rare cases, the effect has error should discard it.
|
