|
|
|
Change the video player.
|
|
|
1st. Question.
The GoPro h.264 1080p/60 should be editable in PD20 with no issue. If not you can enable shadow files at the lower resolution.
2nd. Question.
You can use the Profile Analyzer in production to create your videos using svrt which is the original resolution and highest quality.
In the Create Disc/ 2D/ BD, you will find that 1080/60p available with a warning that not all low priced BD players can play them. Be sure your standalone BD player can play them by reading the player specifications. This is also known as the avchd 2.0 specifications in which higher end players are capable. You can have about 1.9 hours of video on the disc. You can have less than about 3 hours of video on the disc if you choose 1080/60i 17 mbps instead in PD20.
You may want to run the produced video through a video converter like handbrake to reduce the bitrate even further before placing them on a portable dive that you mentioned.
|
|
|
I have no problems running PD17 on a fresh install on Windows 11. I do notice that it can be set to a Win 8 compatiblity mode if desired after reading this thread. Many users have told us that PD9, PD10, PD12 works just fine on win 10 while others can't get them to work. Your mileage can vary depending on what you can do with some knowledge or help.
If the splash screen is a problem then why not skip it and go directly to the timeline in the Preference settings.
|
|
|
Your screenshot above does not show any DVD button that you claimed to have clicked. Why not? The BD and AVCHD buttons may be there too if you post a better screenshot.
Any further help is best handled by Cyberlink Support concerning the license renewal and possible payment.
|
|
|
|
I created BD and avchd Discs today. Click the DVD button and it did not crash on my pc. Try clicking the two other buttons and see if they crash on your pc. Payment as you asked may or may not be necessary. Only Cyberlink support will know if you decide to contact them.
|
|
|
|
You need to report this to Cyberlink support as another user reported the same thing earlier.
|
|
|
|
In Preferences/General set it to a 60 fps drop frame. In the Video Speed Designer/Settings, check the box to Apply interpolated technology which is available at 0.250.
|
|
|
|
Use a backup of the original install files downloaded on the old pc is better.
|
|
|
|
Sorry to hear that PIX has left here as a moderator. I read and enjoy his helpful answers in the PhotoDirector forum.
|
|
|
|
uninstall.
|
|
|
|
Simply reinstall the Boris FX like in this post: https://forum.cyberlink.com/forum/posts/list/97672.page#392702 .
|
|
|
|
HandBrake is a tool. See this post on others using it: https://forum.cyberlink.com/forum/posts/list/20/42116.page#217950 . It is very easy to use and figure out.
|
|
|
|
A corrupted file will play on many players but cannot be edited on a video editor. There are tools available on the internet that you can use to fix them. Some are free like VLC and HandBrake.
|
|
|
I just modified and saved a custom title with a science fiction theme - Sparkling/Movie-Opening 2 Closed and reopened PD365 and the custom title is there along with the ones created in the earlier versions of PD. It is possible that the particular title you used is the problem or the saved name is the problem.
You can contact support and give them the information on which title you used and the filename you used so they can advise or help to fix whatever is the issue.
|
|
|
The track manager won’t allow me to place a fx track above track 2 or below track 1, It incorrectly places it between track 2 and track 3. Updated PD365 to the latest patch after this.
I was able to place the fx track like in your screenshot by reversing the track order in Preferences and then use the track manager to place the track above track 2 and then reversing the track order in Preferences. Only the Track 1 audio track will be shown. Can’t scroll up to see the track 1 video track. Once a sample video clip is dragged and dropped on track 1, the track 1 video track can be seen. Revolve the sample clip and track 1 is still seen now.
fx/Style Effects/Blur placed on the fx track is okay.
There appears to be bugs in PD365 causing these problems. You may want to contact CyberLink support to report this so that they may want to fix it. You may also reference this post in writing the Support ticket.
|
|
|
|
It looks like it's worth having for $99.for it’s capabilities. The time stamp unfortunately is static. The PhotoDirector did well on those in my test on an image. That partial image may be used in a static setting video interview,
|
|
|
|
As I understand the licensing, it will work with all the other video editors you have installed on your pc that they support. Titler Pro 7 works as a standalone on the consumer video editors as described in their faq. Those effects would probably work in PD19 if you purchased them two years ago. Updates and new versions tend to make things incompatible with PD. You need to work with the NB tech as Cyberlink is not going to help you as they classify it as 3rd party products.
|
|
|
You may want to try something like what Warry suggested to reduce system resources. You did not specify whether the failure was in the authoring step or in the later image creation step..
Try this: In the Final Output Window, check Create a folder only.and leave all the other boxes unchecked. Set the folder directory. Start burning. If this is successful then you can use VLC to view and play the dvd folder like a regular disc. You can also burn the folder with any disc utility like ImgBurn or Power2Go for free.
|
|
|
Your screenshot of what you want shows an aspect ratio of about 1.06 to 1. I don’t use the freehand pan and zoom. It may be better to change the Aspect Ratio to 1:1 or one of the supported AR. This project is set to 1.0 AR and the sample 16:9 AR video was edited to provide the center portion produced as a square video. Use the PiP designer set to maintain aspect ratio and you can pan anywhere in the video and not have stretch distortions.
If you want distortions then right mouse click on the clip on the timeline and choose Set Clip Format/Set Aspect Ratio… and tick the different settings.
|
|
|
Bend1948 - We are able to use NewBlue plugins and effects in newer versions of PD even if they are not included anymore. They can still be obtained from other sources.
Unless something changed in the last day or so, see the screenshot of my PD365 Business Edition Trial. Those NB packs, both classic, and free giveaways were just installed yesterday after being given the okay from NB support. They appear and are working in my PD365 Business Trial. Cyberlink might have made some changes to their trial edition in the meantime.
|
|
|
|
Those three packs circled in red in the screenshot are the NB Giveaways I posted in 2021 and they are working in the PD20 Business Trial now on my pc. That also worked with the PD365 trial on my failed drive. Download and install the PD Business trial and you’ll see it available and usable there..
|
