|
|
I too have a problem with fade in/ out in title designer.
Bascially its greyed out and you cannot select it.
I click on title designer---- Select default title-- Box pops up----- I click on the box to enter text--- I enter some text--- then I go over to the left hand controls to click FADE IN and FADE OUT but its greyed out. I cannot select it. What am I doing wrong please?
Thanks.
OHH I have PD12.
|
|
|
What caused the conflict? = Powerdirector 11. After 'install codecs were set to PD11 and PD11 and PD 10 did not work after install.
What software did you use/install that initiated the problem for your system to corrupt the default codec set up? = Powerdirector 11
I would be concerned that a software/cause has yet to be identified and you may inadvertently repeat the problem. = Problem only occured when I installed Powerdirector 11. The ONLY thing causing me problems was PD11
I'm glad a system restore to an earlier date restored your OS default setup. = Restored it to pre-install of PowerDirector 11
It is a worry that you had issues on your system which have caused you so much grief. = Yes me too.
PowerDirector wasn't to blame here (and isn't the buggy software! ) in the end ????? OHhh I wonder what it was that caused me all this grief.
|
|
|
Sorted. The codecs supplied with PD11 conflicted. I downloaded a codec checker and reset to Windows values and now it all works.
I did not have problems with PD10 it worked really well. Then I installed PD11 and it didnt. I uninstalled both. Did a system restore to before the PD11. Re-installed pd10 and it worked. I then re-installed pd11 and it, that is to say pd10, no longer worked. As I said I ran the codec checker. Reset to original values and now I can import wmv, mp3 fine. PD10 & 11 work.
So if you get these errors, and believe me I have seen plenty of people through google who do, then run a codec check.
|
|
|
Wipe my hard drive??????? Re-install my OS? I really hope you are joking. This is something I would never do just to get one program working. Personally I would agree it will probably sort out the problems but its like saying rip out your house wiring to fix a fuse. I like to think I am very good with my computer. I will sort this out.
The files play in everything else except PD11 and now PD10. They play on QT and Microsoft media player and a couple of other old video editing programs I have. I dont have any problems on my comptuer except with PD11. I regret asking now.
At the moment I have just uninstalled PD11 AGAIN. and the premium pack. Now I cannot find the CL-Premium pack uninstaller. I know support have mailed me the link but I cannot even find that now. ![]() Its a good thing I have a lot of patience.
|
|
|
This software is so buggy if it were no so good in the past id have given up by now.
Ok. My latest error codes, since managing to get Content Pack Premium installed, is " Media Source error [ Error Code 2]" What is really bugging me is that this worked fine before and I cannot think of why its not working now. The only thing I have done is delete and import the Premium content pack. I have read past reports about using Format Factory etc and I have tried that.
The files that are in error now are Audio files. I cannot play any of my MP3 or WMA files. The show up on the time line with either a straight line for Mp3 Files or a wave form line with the WMA files. If I just import a MP3 file with no video then I get the error so I dont think its a video problem as they alone dont throw up codes.
These files played ok before in PD11 now they dont. PD11 also does not like its OWN files. Tram.wmv and Nature.mpg files wont play without getting an error code.
Is it going to be yet another uninstall and re-install job???? 17th time lucky?
|
|
|
Sure is. I did several searches and never found it. Eventually Support sent me a link to download it. Thats what I ment when I said I wished they would put all the uninstallers on one easy page.
|
|
|
UPDATE
Just of of curiosity I ran the CLContent Premium uninstaller then tried to install the Premium Pack. As I type this its working. Sods Law as we call it in the UK. ![]()
Its finished and loaded without problem. If a mod reads this from Cyberlink PLEASE put all your uninstallers on one page??? Save a lot of hassle.
|
|
|
Guys. Thanks for the replies but as I have the contents now I have sort of given up as to why it was not working.
However I agree with the assumption that there is something in the registry that blocks the install. I did a 'Reg edit' and found only one reference to the premium pack and deleted that. Still would not load. Just out of sheer curiosity I may run the CL premium pack uninstall then attempt an install just to see if it works.
Yes I still have PD10 on my system. Thats what I ment when I said all the Cyberlink programs are intertwined in someway.
Its like the inverse on the masks that (I posted in another thread) there is no reason as to why the mask wont invert but it doesnt. The mask simply goes all black. I have checked the MASKS folder and the inverse mask for each is in there. I am quickly coming to the assumption I have a bad disc or something.
As I said previously I am going to try the cl uninstall for the premium pack and see what happens. No advantage but just out of sheer curiosity. ![]()
|
|
|
|
Quote:
You might want to take a look at the free REVO uninstaller. It is excellent at ferreting out bits and pieces of software that other uninstallers leave behind.
I had basically the same problem re-installing some software, the computer would say that it is already installed. The REVO UI took care of that problem.
Eugene
I have got Revo uninstaller and in one or two of my CL PD11 uninstalls I used it. However I prefer YourUninstaller. More intuative and still gets as many files and registry items removed. I think CL products are so intertwined you can never really get rid of all the programs.
|
|
|
Yes I did look in control panel
I have done better than a manual delete I used a powerful removal too that removes all traces.
Yes I have Windows 7
I too used google search and found the removal tool listed there. But as I said previously there is no Premium pack removal tool on there.
UPDATE
I gave up on the install method. Instead I worked my way into the files. Found all the extra's in there PIP's, Styles, Slideshows etc and manually put them in my PD11 folder/s. So problem solved, sort of. All the premium content is now on my disc.
Ironically it took me less time to do it than just one of the uninstall/reinstalls.
Thank you all that have taken the time to reply ![]()
Footnote.
Talk about timing. I have just had an email from support. They have given me a link to the CLcontent pack Premium uninstaller too. Of couse now I dont need it. Apparently they were checking to ensure that I have a proper registered version. Ohhh well. ![]()
![]()
|
|
|
Thanks guys. But none of the links show me the cleaner tools for the Premium packs. I have downloaded and used the CL cleaner for the actual program pd11 but I believe the reminants of the Premium pack are still in there stopping me re-installing the premium pack.
I get the message " Error applying transforms. Verify the specified paths are valid........" it then gives me the location of the 1033.mst file. I looked in that folder and 1033.mst file is there. Its not locked. I have installed using myself as admin. I have been in regedit and only found one mention of the Premium Pack and deleted that. Running out of options...........
I have also looked in setup ini files to see if I can alter anything, but found nothing obvious. Changed nothing. I will sort this but a premium pack uninstaller would I think have helped.
|
|
|
I am having problems installing the premium pack. Tried all sorts to resolve the problem, including uninstalling the entire pd11 with youruninstaller and CLuninstaller tool. So I was wondering as there is a CLpd11 uninstaller tool is there an uninstaller tool for the premium pack? I did manage to install the premium pack when I first got the software but at first I had trouble with Pd11 itself so I uninstalled the lot and reinstalled, but the premium pack just wont re-install.
So is there an uninstaller tool for the Premium Content pack?
Thanks in advance :![]()
|
|
|
Thanks for your help Tony. Yes it looks like I am not the only one with Transform path issues.
I have searched the forum and it looks like I may need a content pack uninstaller. Has anyone got a link to it?
I tried running the cl uninstaller for the main program. Then re-installed. No luck on the mask issue.
I also copied the mask files from my pd10 and posted them into the pd11 mask folder. Mask inverse still does not work. I can live with that. However id like to get the premium pack installed. The annoying bit is when I first installed the premium installed fine. Trying to fix the mask problem (((**& up the premium pack.
The revo uninstaller bit was tried with no sucess.
Thank for all the help so far. :![]()
|
|
|
Just had a little thought. Is there perhaps a set of inverse images stored in my cyberlink files? So instead of inversing images it simply calls apon the reverse image as it where?
Tried, yet again, to re-install pd still not working. Now to make it worse the Premium content pack wont load, though I must admit I dont even remember whats is in there.
The new error message I am getting is :
"Error applying transforms. Verify that the specified transform paths are Valid" It then gives the path to RarSFX0\1033.mst.
I think I am doomed to not getting this in working order. I got it as a gift so I am relutant to say anything. Apart from this it works ok ![]()
Whats in the Premium pack that I am missing?
|
|
|
Vaio computers seem to be made on the sell-and-forget system. I bought the, at the time, latest and most upto date computer I could find. But since buying Sony has produced no updates that I can find. Because it uses a unique graphics card set up in the screen the driver updates never work. I have written to Sony many times in the past and basically got nowhere.
But I do thank you for trying. I shall try those links you put up. Perhaps I am getting to sceptical. ![]() As I said will keep trying.
|
|
|
Yep I agree. But I updated the driver to the latest one and it did not work. So I did a roll back to see if that made a difference. It didnt. However that is a good link and thanks for it ![]()
|
|
|
Dxdiag found nothing wrong. Also ran a couple of codec checker programs, again nothing. As for uninstalling I do use Revo uninstaller and used it to remove all old traces of PD11.
Looks like I am going to have to live with it. More of a puzzle than anything else.
|
|
|
Yes you are correct. However the area highlighted in brackets and movable brackets is still visible. The mask itself is not evident. If I inverse the inverse, if you see what I mean, the mask does re-appear.
By re-installing the latest driver for GPU you mean graphics processor unit? If so yes mine is all up to date. Its not just a display problem. I inversed the mask then produced a AVI and there is no sign of the inversed mask on the AVI so it cannot be just a display problem.
I tried re-installing all my PD 11 files, yet again. This time I get a message :- "Error applying transforms. Verify that the specified transform paths are valid. " It points to a file called 1033.mst Can this have anything to do with it?
|
|
|
I think its 'un-highlighted' because I deselected as I went into getting a photo clip of the page. Have since run the program again and even with it highlighted it still does not work.
I have run dxdiag and a few other programs and everything seems to be ok.
Its not the end of the world if this does not work, I was just curious as to why it did not. As I said I have updated everything and checked all the files I can think of.
Mine is the ultra version 3026, which I assume is the latest. Before you suggest re-installing, tried that. I bet its something really simple.![]() ![]()
|
|
|
|
Without inverse at 0% and 100%
|
|
|
|
These are two pics with mask inversed
|
