|
|
Could you provide your system log file for further analysis.
PART-A and B
http://forum.cyberlink.com/forum/posts/list/7958.page
|
|
|
You can try this:
Open YouCam -> settings -> capture -> select your built in camera
|
|
|
First, please check device manager to make sure built in camera is installed properly.
If all well at device manager, then open YouCam -> settings -> capture
and select your camera -> click on ok.
|
|
|
I believe 'Rocket-Scientist' wants to ask the profile that you have chosen before going to Final output screen.
I suggest you to produce a MPEG2 HD first and then import the same in new project and create a DVD. I hope this will help you.
|
|
|
|
I believe activation of a product is not a concern for users. The only concern is CA.
|
|
|
Thanks Michael for the information.
However, what if user (dunbar123456) didn't change region code ever and still PowerDVD shows chances renaming 0.
As per dunbar123456, other softwares behaves normally.
Please share your thoughts !
|
|
|
|
what about MACc address tracking option...
|
|
|
I do agree with Jamie , there should be some alternative for ease of user. Cyberlink should create some alternative using which user don't have to install the previous versions after there upgrade.
"Previous version -> Upgrade to latest version" is ok for 1st time, as it might be possible that Cyberlink needs to check the legitimacy of a user.
But once the upgrade done for the 1st time, user should get single link instead of all old softwares first and then install the latest one....
|
|
|
Hi Michael -
did you check the snapshot sent by dunbar123456, the drive is BluRay .... (see attached)
|
|
|
Dafydd is correct ! the CA is there to stop piracy and in the long run it really a good for legitimate users.
But I am also agreeing with your point of view that there shouldn't me any pain for legitimate users.
Cyberlink can track using the MAC address instead of IP address. As the IP address could be change if user did not purchase a public IP address from the provider.
Moreover, if user wants to change his hardware, then they can request CyberLink to change the MAC address currently saved in their database.
|
|
|
|
My experience towards tech support is different from yours. I got response as and when required.
|
|
|
|
I have tested your video clip and produce to MPEG 4 (1920x1080p60) and didn't face any issue. neither higher CPU usage nor white screen during production. Please let me know if I am missing something.
|
|
|
|
Yes, please share the file so that we can also check
|
|
|
|
Did you contact tech support regarding this ?
|
|
|
|
PDVD 11 does not play Blu-Ray folders.
|
|
|
AVCHD disc — AVCHD video, recorded onto DVD disc can be played on most Blu-ray Disc players[9] or on a PlayStation 3 gaming console. As Blu-Ray player are backward compatible.
Blu-ray disc — AVCHD video, recorded onto Blu-ray disc can be played on any Blu-ray Disc player.
PS: For sure regular DVD players won't play AVCHD discs until and unless they support AVCHD playback.
|
|
|
Did you check the downloaded section?
(Below Edit tab), there is a drop down (click on "All contents" and select "downloaded")
|
|
|
|
I have checked it again and found that there is no such issue with powerdvd 11. Software shows the 2 lines of text in 2 lines.
|
|
|
I have checked the files and found that
If you place both mkv and srt in the same folder then PDVD 11 shows the subtitle in the 2 ROWS.
If you remove the srt file from the mkv folder, then PDVD 11 shows the subtitle in the single line.
|
|
|
|
How would know alank is having SLI?
|
|
|
|
I believe there is no setting.
|
