|
|
I thought I would post the reply I received from CyberLink Technical Support relating to the "EB130581" error fault I received, as a number of other posters seem to have had the same issue.
I haven't tried the resolution suggested as yet, however hopefully this resolves the issue.
Dear Glenn,
Thank you for contacting CyberLink Technical Support.
We understand your concern related with PowerDirector 7.
Please follow the steps below to resolve the issue you are facing:
1. Start Windows in Selective Startup mode.
a. Click on Start.
b. Click on Run.
c. Type msconfig and click on OK.
d. A System Configuration Utility window will come up.
e. On General tab, select Selective Startup.
f. Uncheck "Load Startup Items".
g. Click on Apply.
h. Click on OK.
i. Click on Close.
j. It will ask you to restart your computer. Click on "Restart".
2. Increase Virtual memory :
a. Right click on "MyComputer"
b. Select Properties -> Advance
c. Click on "settings" under Performance.
d. Select "Advance"
e. Click on "change" under Virtual memory.
f. Select "Custom" and enter initial value as "2048" and Max value as "4096".
NOTE : If your current settings are higher, please do not change the settings.
Use the below mentioned link to get back to us for immediate response for your further queries:
>> http://www.CyberLink.com/english/cs/support/form/index.jsp <<
Please feel free to contact us back for any further clarification or for any assistance related to CyberLink products.
Thanks and Regards
CyberLink Technical Support
|
|
|
I have no idea how to fix your problem, but I find your terminology offensive!
How about you use a more acceptable adjective to describe the 100MB limit!
|
|
|
|
Do any of these suggested downloads include a full range of effects, or do I have to search and download them individually?
|
|
|
OK I have completely removed PD 7 from my computer including all the hidden reg files as suggested, downloaded the patches, reinstalled the program, the patches were accepted, but upon trying to burn my project I get this error message:
Can anybody suggest something new to try?
Thanks!
|
|
|
I was wondering if anybody knew where I could download, or if anybody has a link to download some sound effects?
I am pretty new to PD7 Ultra and previously used Pinnacle 12, which has a full range of sound effects like animal noises, bells, sirens, chimes, machinery noises, etc.
I found these sound effects very useful and creative, especially when there was any swearing you want to bleep out.
|
|
|
This is the error message I get when I try to burn my project in PD7.
Anyone know what this means please?
C:\Program Files\CyberLink\PowerDirector\PDR.exe
Abnormal program termination
|
|
|
Well, I'm learning about my video editing procedures and getting a spelling and grammar lesson to boot!
I really do appreciate the tips and advice from people who understand the issues well.
Thank you! 
P.S. Do you happen to know the correct link to download imgburn? I got on the website but couldn't identify the correct download link.
|
|
|
I had a problem downloading the program but turned off my Firewall and Virus protection and that did the trick.
That may help.
|
|
|
Thanks for all the responses.
The Firewall trick seemed to stabilise the system and allowed me to edit my project fairly well without crashes.
The files created by my JVC camcorder save as .MTS files on my compture rather than .MOD, so I'm unsure if that effects anything and they still need to converted to AVI? I had to restart my project several times as well, as I found that somehow PD distorted the voice to image and I was creating "Spaghetti Westerns" with the voice out of sync with the image! I think the distortion occured due to the many crashes I experienced, as after I shut down the firewall and the system stabilised, this didn't seem to be a problem anymore.
I downloaded PD online and have ordered the back up disc, so I was reluctant to remove the program and do the clean up until I have the program disc in my hands. I'm sure I could make a copy of the downloaded program if I tried, but I haven't tried that before and am too focused on getting this one big project completed. Thanks for the suggestion and I will try this once I have the program disc.
The project finished up being about 6.5G, so I had to buy dual layer discs to burn it on. I tried burning the movie, but it kept crashing during the burn and I wasted 5 discs before I decided to try another tact. I produced an AVI file on my computer from the "produce" menu and then made a disc with Nero from that file. The only problem was it didn't recognise the chapters. I then managed to create a file from the "create" menu without highlighting the burn disc option. I have this file on my computer now and would like to produce/burn it with PD so that I may retain the chapters I created. Is this possible?
I greatly appreciate all the replies and advise and hope I can contribute as well to help other users through the video production maze.
P.S. "Somebodies" is the correct spelling of the plural of "Somebody" as defined in the Oxford dictionary! Sorry I just had to as well! :
|
|
|
Hi There,
Just a Newbie to this forum, so would appreciate somebodies advice.
When editing a fairly long HD movie (approx 1.5hrs long) from my JVC HD40 camcorder in PowerDirector 7, the system keeps crashing.
This is usually when I am trying to shorten the length of an individual clip or delete one all together. I have a feeling it is because the system can't handle the big move of adjusting the complete timeline.
I also experienced a very strange phenomenon when editing a previous movie. Yes, it crashed 3000+ times and then the audio went out of sync with the image on all clips! Could it have just corrupted the images because it did crash so many times? I have never worked with such an unstable system. I use to work with Pinnacle with my old tape style camcorder and that gave no trouble whatsoever. It seems upgrading to a HD Camcorder has complicated everything in my quest for a better picture.
I also tried to download the patch 2227 but I get the error response "Can't load SKUtil.dll". I think it is trying to uninstall the program to install the patch but I am getting more and more confused.
Anyone have any tip, suggestions or solutions would be greatly appreciated as I am getting very frustrated with this?
Thanks,
Glenn
|
