|
|
Thanks for all the advice. I did what I wanted using Cyberlink Audiodirector 7 to extract and reverse the audio track and extracted the video track with PWD. I then loaded both into PWD, linked them and produced the mp4.
This seems to have been completely successful.
|
|
|
Quote
I'd probably see if the issue occurs with a little more current produce format, try H.264 and mimic source clip details.
If that does not work, attach a pic of your timeline and source media details (MediaInfo text) so one might get a glimpse into why the issue.
Jeff
I have tried the H.264 but am not sure what you mean by mimic source clip details, unless it is make sure the framerates are the
same, which I did.
Mediainfo data is
General
Complete name : H:\hFilms\new\DR.mp4
Format : MPEG-4
Format profile : Base Media
Codec ID : isom (isom/iso2/avc1/mp41)
File size : 1.17 GiB
Duration : 2 h 25 min
Overall bit rate : 1 151 kb/s
Writing application : Lavf58.20.100
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L3.1
Format settings : CABAC / 3 Ref Frames
Format settings, CABAC : Yes
Format settings, Reference frames : 3 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 2 h 25 min
Duration_FirstFrame : -33 ms
Bit rate : 1 016 kb/s
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Frame rate : 30.000 FPS
Minimum frame rate : 30.000 FPS
Maximum frame rate : 30.020 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.037
Stream size : 1.03 GiB (88%)
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
Codec configuration box : avcC
Audio
ID : 2
Format : AAC LC
Format/Info : Advanced Audio Codec Low Complexity
Codec ID : mp4a-40-2
Duration : 2 h 25 min
Bit rate mode : Constant
Bit rate : 128 kb/s
Channel(s) : 2 channels
Channel layout : L R
Sampling rate : 44.1 kHz
Frame rate : 43.066 FPS (1024 SPF)
Compression mode : Lossy
Stream size : 133 MiB (11%)
Default : Yes
Alternate group : 1
Again, I assume that by timeline you mean a screenshot of PWD showing the clip (?)
I attach that.
|
|
|
Quote
Thanks for the reply.
I did as shown on the png, ie Power tools, video in reverse then Produce to AVI.
Playing the resultant file showed the audio problems I mentioned. The audio is very 'choppy' and drops
out completely at times.
Should I have done anything else ? As you can guess I am new to all this.
Playing in reverse within PWD has all the audio with no choppiness, lagging or dropping. It would appear that
the problem lies with the Produce activity.
|
|
|
Quote
I assume you are probably referring to timeline playback and audio lag. If you "Produce" the timeline to your preferred file format it should be okay. Or if you want it to playback in the timeline edit mode, try using the "Render Preview" feature and/or reduce timeline "Preview Quality" setting.
Jeff
Thanks for the reply.
I did as shown on the png, ie Power tools, video in reverse then Produce to AVI.
Playing the resultant file showed the audio problems I mentioned. The audio is very 'choppy' and drops
out completely at times.
Should I have done anything else ? As you can guess I am new to all this.
|
|
|
Quote
Tools > Power Tools > Video in Reverse
Jeff
Thanks for the reply.
It worked as far as the picture was concerned, but the audio started off ok but then was anything up to 2-3 seconds out of synch
or disappeared completely.
Is there any way round this ?
TIA
|
|
|
Quote
The answer is yes if you have the full retail version of PD15.
I do have the full retail version. How is it done ? I can only find references to playing forward then reverse, not how to do
what I want.
|
|
|
Is it possible to load a video file into PWD15 and save it out reversed? ie. the original start as the end and the original end as the start.
TIA
|
|
|
Quote
Quote
Help/About Cyberlink says PowerDirector LE 14.0.2820.0. Maybe thats the reason.
Not aware that the LE version of PD14 being available anywhere. Let us know how it is obtained.
From here.
http://sharewareonsale.com/s/cyberlink-powerdirector-sale
Just noticed it says LE edition
|
|
|
Quote
Do you have the full version of Power Director 14 or do you have the trial or OEM version? Both of those are limited in what they can or cannot do.
If you have the full version, go here (link) and tell us what the Build Number and Serial Number are.
I assume you are using a USB port on the back of your computer and not one in the fromt or via a hub.
I don;t have that device but I have two other devices that work well. I have , in the past used different devices and they would not work with other than the software that comes with the device OR one very similar.
Help/About Cyberlink says PowerDirector LE 14.0.2820.0. Maybe thats the reason.
|
|
|
Hello all
Has anyone any experience of using PD14 to capture video froma Dazzle DVC100 device ?
http://forum.cyberlink.com/forum/posts/list/50308.page mentions using a diamond multimedia one touch video capture VC 500 to capture, which is a similar device to the Dazzle, eg. USB2
I open PD14 and select Capture
I get a message saying Initialising Analog device
In the captured content windows get Line(Dazzle DVC100 Audio Device)
In Settings - Video setup Capture Device is shown as 001 - only one in dropdown.
Device resolutions dropdown is blank.
Audio device shown as Line (Dazzle DVC100 Audio Device)
Select Advanced settings - nothing happens
Audio input is greyed out
Mixer - Record tab is Line Dazzle DVC100 Audio Device
Capture options are
Capture from HDV Cancorder get Your version doesn't support this feature. Upgrade and enjoy complete set ot features.
Capture from a webcam - nothing happens
Capture from a microphone get Detecting audio device - no sound captrured
Can PD14 capture from a DVC100? I have Pinnacle Studio 15, AVSVideoRecorder and Serif MoviePlus X6, all of which can capture from the DVC100, but I think that the more capture options I have the better.
|
