Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

Robert Panny TM10, GH2, GH4,

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Sorry, I don't see it at 1080 resolution. But I don't get a fade at 5 seconds, just a jump from light to dark. After that it's too dark to see a shimmer. Regards,
Dan
Power Director 21-Ultimate
v 21.0.3111.0
XPS-8940, Win-10 64-bit,
Intel Core i9-10900 processor
(10 core, 20M Cache),
32GB DDR4 RAM, 2TB M.2 PCIe NVME SSD, 2TB 7200 RPM SATA HDD,
NVIDIA GeForce RTX 2060 SUPER 8GB GDDR6

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Sorry, I don't see it at 1080 resolution. But I don't get a fade at 5 seconds, just a jump from light to dark. After that it's too dark to see a shimmer.

Hi Dan

It's not just me then? Whatever it is is very hard to see. Panny TM10, GH2, GH4,

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Sorry, I don't see it at 1080 resolution. But I don't get a fade at 5 seconds, just a jump from light to dark. After that it's too dark to see a shimmer.

Thanks ... yes I just joined two clips together; the beginning and end of the project. You do have to look very clsoely, I know. Maybe the still I attached gives a better look?

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

Quote

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

Also ... my original render from LRTimelapse is unaffected with no problems ... it's a PD issue.

Quote

Quote

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

And me again: If you go to full screen on that Vimeo clip it's more apparent. Very top of frame at the start, and coming down from the top at the end.





Also ... my original render from LRTimelapse is unaffected with no problems ... it's a PD issue.

Quote

Quote

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.



Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

Also ... my original render from LRTimelapse is unaffected with no problems ... it's a PD issue.

That's why I said this: Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts. Panny TM10, GH2, GH4,

Quote

Quote

Quote

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.



Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

Also ... my original render from LRTimelapse is unaffected with no problems ... it's a PD issue.

That's why I said this: Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

I've looked and looked again, now I think I see what you mean. I would describe it as a black curtain coming down - am I seeing right? Panny TM10, GH2, GH4,

Quote

Quote

Quote

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.



Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

Also ... my original render from LRTimelapse is unaffected with no problems ... it's a PD issue.

That's why I said this: Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

Yes I will and thank you!

Quote

Quote

Quote

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.



Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

Also ... my original render from LRTimelapse is unaffected with no problems ... it's a PD issue.

That's why I said this: Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

I've had another look and I think it is something to do with compression. If you produce in H264 try H265 or XAVC or visa versa. Panny TM10, GH2, GH4,

Quote

Quote

Quote

Quote

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.



Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

Also ... my original render from LRTimelapse is unaffected with no problems ... it's a PD issue.

That's why I said this: Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

I've looked and looked again, now I think I see what you mean. I would describe it as a black curtain coming down - am I seeing right?

YES! The black curtain of weirdness ... it's wrecked so much of my stuff.

Quote

Quote

Quote

Quote

Quote

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.



Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

Also ... my original render from LRTimelapse is unaffected with no problems ... it's a PD issue.

That's why I said this: Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

I've looked and looked again, now I think I see what you mean. I would describe it as a black curtain coming down - am I seeing right?

YES! The black curtain of weirdness ... it's wrecked so much of my stuff.

Did you see my last post? Panny TM10, GH2, GH4,

Quote

Quote

Quote

Quote

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.



Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

Also ... my original render from LRTimelapse is unaffected with no problems ... it's a PD issue.

That's why I said this: Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

I've had another look and I think it is something to do with compression. If you produce in H264 try H265 or XAVC or visa versa.

Thanks will try! Appreciate it, and everyone's help.

Quote

Quote

Quote

Quote

Quote

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.



Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

Also ... my original render from LRTimelapse is unaffected with no problems ... it's a PD issue.

That's why I said this: Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

I've had another look and I think it is something to do with compression. If you produce in H264 try H265 or XAVC or visa versa.

Thanks will try! Appreciate it, and everyone's help.

--------------------------------------------------------------------------------------------------

Hello,



For me this is a "compression" problem and not necessarily through PD14 but possibly of your support card (SD or better). It happens many times. Have you tried an other editing prog to compare?

Success!



Alain II

Quote

Quote

Quote

Quote

Quote

Quote

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.



Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

Also ... my original render from LRTimelapse is unaffected with no problems ... it's a PD issue.

That's why I said this: Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

I've had another look and I think it is something to do with compression. If you produce in H264 try H265 or XAVC or visa versa.

Thanks will try! Appreciate it, and everyone's help.

--------------------------------------------------------------------------------------------------

Hello,



For me this is a "compression" problem and not necessarily through PD14 but possibly of your support card (SD or better). It happens many times. Have you tried an other editing prog to compare?

Success!



Alain II

As a last resort, try rendering in Quicktime, I've heard that it handles banding very well Panny TM10, GH2, GH4,

Quote

Quote

Quote

Quote

Quote

Quote

Quote

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.



Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

Also ... my original render from LRTimelapse is unaffected with no problems ... it's a PD issue.

That's why I said this: Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

I've had another look and I think it is something to do with compression. If you produce in H264 try H265 or XAVC or visa versa.

Thanks will try! Appreciate it, and everyone's help.

--------------------------------------------------------------------------------------------------

Hello,



For me this is a "compression" problem and not necessarily through PD14 but possibly of your support card (SD or better). It happens many times. Have you tried an other editing prog to compare?

Success!



Alain II

As a last resort, try rendering in Quicktime, I've heard that it handles banding very well

Thanks again everyone ... still working on it ... AVC and H265 helped a bit but still there. Alain, not sure what you mean by support card' ... you mean my computer graphics card?

Quote

Quote

Quote

Quote

Quote

Quote

Quote

Quote

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.



Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

Also ... my original render from LRTimelapse is unaffected with no problems ... it's a PD issue.

That's why I said this: Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

I've had another look and I think it is something to do with compression. If you produce in H264 try H265 or XAVC or visa versa.

Thanks will try! Appreciate it, and everyone's help.

--------------------------------------------------------------------------------------------------

Hello,



For me this is a "compression" problem and not necessarily through PD14 but possibly of your support card (SD or better). It happens many times. Have you tried an other editing prog to compare?

Success!



Alain II

As a last resort, try rendering in Quicktime, I've heard that it handles banding very well

Thanks again everyone ... still working on it ... AVC and H265 helped a bit but still there. Alain, not sure what you mean by support card' ... you mean my computer graphics card?

>Alain, not sure what you mean by support card' ... you mean my computer graphics card?

No, the support on which you record your raws of your camera. Check if other (SD?) cards give this also or if you have this effect in an other editing prog?

Alain II

Quote

Quote

Quote

Quote

Quote

Quote

Quote

Quote

Quote

Quote

Quote I can't conquer this and it's making me crazy. It ruins my videos and requires work-arounds to disguise it that aren't what I want to do and don't work that well.

When fading in or out on a light (sometimes dark) sky scene, I get this weird 'shimmer' thing. problem clip -- ten seconds on Vimeo and you have to watch closely. Also attached a screen shot here. Can someone please help?!?

Note: I render with LRTimelapse and the results are fine ... PD puts on the shimmer.

Hi Nick

I think the fact that you are not getting a great response may be down to the fact that what you explain is very difficult to see. However, I had a look at the still under magnification and could see what I thought might be due to, too higher an ISO setting creating some noise. I don't know if you were using manual or auto settings, but checking the ISO may be worth a try.

Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.



Robert

Thanks ... it is hard to see in what I posted but it's there. ISO varies and it's not high when this happens; it varies. I am stumped and it's frustrating. Maybe I can find a worse example and put it up there ...

Also ... my original render from LRTimelapse is unaffected with no problems ... it's a PD issue.

That's why I said this: Also, have you checked "Reduce Blocky Artifacts" in preferences > produce - Reduce Blocky Artifacts.

I've had another look and I think it is something to do with compression. If you produce in H264 try H265 or XAVC or visa versa.

Thanks will try! Appreciate it, and everyone's help.

--------------------------------------------------------------------------------------------------

Hello,



For me this is a "compression" problem and not necessarily through PD14 but possibly of your support card (SD or better). It happens many times. Have you tried an other editing prog to compare?

Success!



Alain II

As a last resort, try rendering in Quicktime, I've heard that it handles banding very well

Thanks again everyone ... still working on it ... AVC and H265 helped a bit but still there. Alain, not sure what you mean by support card' ... you mean my computer graphics card?

>Alain, not sure what you mean by support card' ... you mean my computer graphics card?

No, the support on which you record your raws of your camera. Check if other (SD?) cards give this also or if you have this effect in an other editing prog?

Alain II

Alain is quite right. Make sure your card is speed class 10 and UHS speed class 3

Robert Panny TM10, GH2, GH4,