|
|
Hi, as says JAMES1 system properties much influence with the time of production.
I earlier took about 5 hours or more to change a video to a compatible DVD.
Today with the new system configuration (compares you with my own, you can see it at: http://forum.cyberlink.com/forum/posts/list/20133.page), and takes little more than one hour to do the conversion
|
|
|
Hello, reiterate my thanks for your help
. Ynotfish, must be the result of less than 4 GB because the format of the card is FAST32 and this format does not support higher files.
Dafydd, the profile that I supply works perfectly. A video in MPEG-TS format of 34 GB to produce through the profile given as result perfect 1.05 GB for my device.
In addition the original file is already SBS which is why what I have produced in the 2D tab and in my HTC evo 3D see it well to 3D.
I will keep trying your advice to create own profiles. Is it missing from the same PD10 can do and have to resort to back doors.
|
|
|
Hello, as requested me to send you a sample taken with my device.
Also send you a txt file with the information of a video that happened to me produced by other means and that it can be visualized in 3D on my device.
It should be noted that I can not take as a profile for my production profile that gives my HTC evo 3D because that resolution end product occupies 6 GB and cannot exceed the 4 GB, that's why wish resolution 960 x 540
thanks
|
|
|
Hi, I tried the profile that you sent and working properly for 2D videos formats.
But to produce one in 3D with WMV9, only with it see it in 2D with the split screen SBS.
Had the possibility of having a profile in mp4 with resolution 960 x 540 and 1500 Kbps
thanks
|
|
|
Thank you for your interest.
The problem is that wish to produce a video for my device (HTC Evo 3D)
.
In the tabs that I choose standard 2D do not have any possibility to change the resolution to 960 x 540, alone can create.MOV and this type can not play it with my device.
In the tabs I choose device, all which are presented to me are very low quality to mine. And may not edit or create new.
As recommended me the part A is: PowerDirector Ultra 10.0.0.1012
|
|
|
|
Hi, is there any way to change the resolution for my device or profile. Because my device requires 960 x 540 and not meeting how to configure it
|
|
|
Hello, I'm trying PowerDirector10 and is very interesting.
For me an essential part is to produce for a device in the test product is a small device which is able to access and change settings
.
My question is whether the final product, there are more devices to choose from, in particular I use HTC HD2, HTC Desire and HTC HTC EVO 3D. Or you can change the resolution settings for my devices.
thanks
|
