|
|
When using properties (in windows) on the SD card it says exFAT, it is an SDXC card.
But I will try the tool you mention, thanks.
Regards,
Bjorn
|
|
|
I have looked trough the manual. What I found was that it is possible to have something called "seamless recording" when writing to SD card or DVD. This setting is enabled by default (when recording modes are same). But this does not solve my issue.
I will try to explain a little bit further:
1. I have recorded one video clip (pressed recording button once) and let it record for over 1 hour before turning the recording off. So basically there shall be only one video in the camera (SDXC card). The video format of the recorded video is 1080@50p.
2. When I later connect the camera to the computer the camera is mounted as g: and it looks like this:
g:\PRIVATE\AVCHD\BDMV\STREAM\00000.MTS (~4GB)
g:\PRIVATE\AVCHD\BDMV\STREAM\00001.MTS (~4GB)
g:\PRIVATE\AVCHD\BDMV\STREAM\00002.MTS (~4GB)
g:\PRIVATE\AVCHD\BDMV\STREAM\00003.MTS (~2GB)
3. When I then do "Copy To PC" in the HD writer AE 3.0
I get this:
c:\Projects\Video1\10-15-2011_172935.m2ts (~4GB)
c:\Projects\Video1\10-15-2011_172935(1).m2ts (~4GB)
c:\Projects\Video1\10-15-2011_172935(2).m2ts (~4GB)
c:\Projects\Video1\10-15-2011_172935(3).m2ts (~2GB)
c:\Projects\Video1\10-15-2011_172935.tmb
c:\Projects\Video1\10-15-2011_172935.pmpd
c:\Projects\Video1\10-15-2011_172935.cont
4. If I open HD Writer AE 3.0 there are only ONE (1) movie displayed in the program and if I play the video within the HD writer it will play for over one hour without any audio or video issue. It looks like one continous video just how I recorded it.
5. The issue comes when I try to import this video into power director. Since the video is split into 4 separate m2ts I add the 4 files after each other in the time line. Then use SVRT to produce the video without any conversion.
6. When playing the produced video there are 3 audio glitches in the video. One at every place the files was merged.
7. Any idea how to make the 3 audio glitches to dissapear.
Regards,
Bjorn
|
|
|
Ok, that seems great, since I have not yet deleted the videos on the camera. I have looked in the different settings in the HD writer AE 3.0 but I have not found anything that let me set this. Can you please check when you are back home?
Regards
Bjorn
|
|
|
If I use the Panasonic software and produce a video the output is splitted in much the same way as the camera does it.
Regards
Bjorn
|
|
|
Panasonic has software who can play the clips without any audio issue, but if I try to produce with this software it also splits the video ![]()
Regards,
Bjorn
|
|
|
I tried to produce it, but it is still there ![]()
Regards,
Björn
|
|
|
When shooting over ~22 minutes with the panasonic SD900 the camera splits the file. When I then import the files into powerdirector and add them after each other in the time line there is a short audio glitch in the audio. Anyone else experience this?
Regards,
Bjorn
|
|
|
Thanks, thats great news, I will try that.
Regards,
Bjorn
|
|
|
Hi,
I have used 2 cameras shoting the same scene but from different angels. I have successfully imported the clips from both cameras into 2 separate tracks. I succeded in syncing the tracks by enabling the video from one track and listening to the audio from the other track. Now I am trying to create a movie with transitions between the two tracks but I have no idea how to do that. I understand that I can clip both tracks at the same place and then remove the part not used. But I would rather keep both tracks and at certain places make a transition from track 1 to track 2 and later a transition back to track 1 and so on without removing the part in the track not used. Is this possible with Powerdirector 10?
Regards
Bjorn
|
|
|
Hi,
I have a Panasonic SD900. I took a rather long, 30+ minutes, clip this weekend (1080/50p).
When I imported it from the memory card I saw that the camera had splitted the clip into two files.
I imported both files into my timeline and produced an svrt output. The problem is that the audio is not correct in the place where the two files were merged.
Any idea how to merge files produced with the sd900 that was split automatically by the camera without audio issues?
I use Powerdirector 10.
Regards,
Björn
|
