|
|
|
If I remember correctly, PD10 needs Quicktime to function, not necessarily iTunes. Try installing the latest version of QuickTime.
|
|
|
If I remember correctly, PD8 needed Quicktime installed. Get the latest one.
Dave
|
|
|
Hi,
In PD10, 16 audio tracks shouldn't be a problem, lets me add 98 to the two (2) already there to make 100.
|
|
|
Hi peter7700s,
Googling your model number suggests that it is a CDRW/DVD player, in other words you can burn CD's but not DVD's. Gonna need a different drive.
Dave
|
|
|
Perfect,
Try the trial version of PD12 and see if suits your needs.
Dave
|
|
|
Hi,
If you don't need them after a year, I'm going to assume you won't and if were me I would delete them. They are not taking up memory but disk space yes. Go into settings and remove check mark from Enable HD video processing on the first tab labeled general. Picture attached.
Dave
|
|
|
Hi broundog,
Since your first link doesn't show anything and your second link leads to a dead page, attach your screen shot to the forum, you need to use post reply, not quick replay.
Dave
|
|
|
Here is a small attached video showing the effect from above post.
Dave
|
|
|
Hi Spekkyboy1,
I have attached 3 photos showing how I achieved going from B&W to Color, it is using keyframes and the Black & White Effect. Place your clip on timeline, place B&W effect on line below it. Select B&W effect so it is blue high lighted and then click keyframes. Notice I placed them at 1 second intervals and set the keyframes (red) and the degree setting also changes, moving back to 100 then to zero (0). Hope this helps.
Dave
|
|
|
Hi createsource,
http://forum.cyberlink.com/forum/posts/list/31396.page
I believe the above link is the latest update for PD 10, latest working version is 3625. Also have you checked for an update on your graphics driver and Quicktime from Apple.
There is a cleaner file for allowing PD to re-install itself on same computer, it is here at http://www.cyberlink.com/support/product-faq-content.do?id=16457&prodId=4&prodVerId=1052
Check this page for info needed, parts A, B and C. http://forum.cyberlink.com/forum/posts/list/7958.page
Dave
|
|
|
Hi DJP,
Is your camera set to VCR mode when trying to capture in Power Director. I see all references to IEEE cards, cables, etc. not working correctly but no mention of VCR mode, referring to page 39 in manual.
Dave
|
|
|
mountaingirl,
top of this page got to support, click on member zone then select my products....might find what your looking for there.
Dave
|
|
|
Longedge,
Awesome sounds!! Thanks for sharing...
Dave
|
|
|
Make sure you have the latest Quicktime installed too. Download it from http://www.apple.com/quicktime/download/
Dave
|
|
|
Hi
j_blueridge,
Try BandiCam for screen capture...also have you tried converting your Action! clips in Format Factory. Just thinking out loud.
Dave
|
|
|
Very glad it worked out for you.
Dave
|
|
|
Hi 1rlmosk2,
Or another way is to bring your video intact to the media room then right click on your video file and select extract audio. It will create a wav file and save in a place of your choosing.
|
|
|
Good work Jeff...
Can't hear it at all.
Dave
|
|
|
Hi Dan,
What is the original quality of the file you are trying to use?
Dave
|
|
|
Also tested clip, no crash in PD11. No audio associated in timeline, shows only video. I used Media Info on the file and really didn't see any audio data listed. Someone correct me if I am wrong.
Dave
|
