I really want to buy PowerDirector 365 but...

splendideyetorture

Newbie Joined: Mar 10, 2022 20:43 Messages: 5 Offline

Solved by

Mar 10, 2022 21:06

Edit: *Attached DxDiag*

*Files play perfect and can move back and forth in real time but still NOT when navigating back and forth along the timeline - so it's 100% an issue with communication between the timeline and preview window only*

I've been playing around with the trial and can see this has absolutely everything I need, however the one issue that is stopping me from buying is the preview window, which is really laggy, when controlling via the timeline.

I've changed the settings to lower resolution (which is okay but quality is unusable), turned off the hardware acceleration features and still no joy. On trialling Corel's Videostudio, Premiere, Pinacle, Davinci on my new systerm, PD365 is the only one that has this issue.

It does work perfect when playing in realtime off the timeline, including moving back and forth using the preview windows own navigation but again, when scrolling through the timeline it's very poor.

I've bought a brand new set up with the below and there is no way I should be using the low resolution settings - especially when all the other programmes timeline previews work perfect.

I really really want this but need the preview to be controlled via the timeline with no lagging/poor quality preview.

It's installed on the same drive as the operating system, and all media etc also on the same drive.

AMD Ryzen 7 3700X Eight Core CPU (3.6GHz-4.4GHz/36MB CACHE/AM4)

ASUS® PRIME B550-PLUS (DDR4, USB 3.2, 6Gb/s) - ARGB Ready!

32GB Corsair VENGEANCE DDR4 2400MHz (2 x 16GB)

8GB NVIDIA GEFORCE RTX 3050 - HDMI, DP, LHR

1TB PCS PCIe M.2 SSD (2200 MB/R, 1500 MB/W)

1TB PCS PCIe M.2 SSD (2200 MB/R, 1500 MB/W)

1TB PCS 2.5" SSD, SATA 6 Gb (520MB/R, 470MB/W)

4TB SEAGATE BARRACUDA SATA-III 3.5" HDD, 6GB/s, 5400RPM, 256MB CACHE

Windows 11 Home 64 Bit

Filename	DxDiag.txt	Download
Description
Filesize	93 Kbytes
Downloaded:	181 time(s)

This message was edited 3 times. Last update was at Mar 11. 2022 17:18

StevenG

Contributor Joined: Jan 14, 2014 14:04 Messages: 513 Offline

Mar 11, 2022 07:26

You've got plenty of power, so that's not the issue. You don't say what the source of your video is or its resolution or format, but that's likely what's sticking in the program's craw.

But that said, if you've got an editor that works, why not just use it? All that really matters, after all, is that you have a program that fits your workflow.

splendideyetorture

Newbie Joined: Mar 10, 2022 20:43 Messages: 5 Offline

Mar 11, 2022 07:37

Quote You've got plenty of power, so that's not the issue. You don't say what the source of your video is or its resolution or format, but that's likely what's sticking in the program's craw.

But that said, if you've got an editor that works, why not just use it? All that really matters, after all, is that you have a program that fits your workflow.

The reason I want to use this software is it ticks all the boxes I need. What's letting it down is the lagging during trimming clips, to which I have hours of footage to go through.

Format is 1920 x 1080 HD

This is the only programme that is giving this issue - which is frustraing as again, it's the only one that has an all-in-one solution for my needs.

StevenG

Contributor Joined: Jan 14, 2014 14:04 Messages: 513 Offline

Mar 12, 2022 08:25

What is the source of the video you're trying to edit? A camcorder? A GoPro? A phone? An iPhone (which is not the same as a phone)?

If you open a new, empty project and you add a dozen photos to the timeline, does the program work?

If so, the issue could be your source video. We can show you how to reveal the deep specs of your video. We may find a clue there.

splendideyetorture

Newbie Joined: Mar 10, 2022 20:43 Messages: 5 Offline

Mar 12, 2022 21:38

Quote What is the source of the video you're trying to edit? A camcorder? A GoPro? A phone? An iPhone (which is not the same as a phone)?

If you open a new, empty project and you add a dozen photos to the timeline, does the program work?

If so, the issue could be your source video. We can show you how to reveal the deep specs of your video. We may find a clue there.

There is no problem with my source video.

It works perfect on all other editing programmes. It's an issue with communication between the timeline and preview window.

Looks like there is no solution here unfortunately.

optodata

Senior Contributor Location: California, USA Joined: Sep 16, 2011 16:04 Messages: 8630 Offline

Mar 12, 2022 23:14

I'm not sure what you mean by the lagging "when navigating back and forth along the timeline." Are you clicking on new clips and waiting for the preview to catch up?

You should be able to use Full HD preview mode and should have Hardware Decoding and OpenCL turned on. The reason StevenG asked about your specific clips is that PD sometimes has difficulty when working with variable framerate clips, and many phone videos are recorded that way.

You can help us help you by following the steps in the 3rd paragraph in this post and attaching the video details. If the clips use variable frame rates, try converting one to a fixed rate using the free Handbrake tool as that will let you know straight away if that's the issue.

You can also try using shadow files and wait for the little yellow icons on the clips in the media library to turn green to let you know that they're fully ready. You can edit before they're finished but the lagging might still be present.

Finally, the trial version has many built-in limitations that the full version doesn't suffer from. You might want to at least consider uninstalling it then paying for the subscription version and giving it a trial run. CL has a 30-day money back guarantee so you won't be out any money if the full version doesn't meet your needs.

jannies

Newbie Joined: Mar 13, 2022 12:49 Messages: 2 Offline

Mar 13, 2022 12:54

Quote

The reason I want to use this software is it ticks all the boxes I need. What's letting it down is the lagging during trimming clips, to which I have hours of footage to go through.

Format is 1920 x 1080 HD

This is the only programme that is giving this issue - which is frustraing as again, it's the only one that has an all-in-one solution for my needs.

PowerDirector continues to lead the way among consumer video editing software. With each release it gets closer to professional-level apps. There isn't sufficient room here to discuss its entire vast feature set, including slideshows, disc menus, 3D editing, screen recording, content-aware features, and animated object design tools to name just a few. Its wealth of powerful tools would be enough to earn it a strong recommendation, but the combination of that with extremely fast rendering speed and an intuitive interface really give it the upper hand.

splendideyetorture

Newbie Joined: Mar 10, 2022 20:43 Messages: 5 Offline

Mar 13, 2022 14:30

Unfortunately not in my case.

Quote

PowerDirector continues to lead the way among consumer video editing software. With each release it gets closer to professional-level apps. There isn't sufficient room here to discuss its entire vast feature set, including slideshows, disc menus, 3D editing, screen recording, content-aware features, and animated object design tools to name just a few. Its wealth of powerful tools would be enough to earn it a strong recommendation, but the combination of that with extremely fast rendering speed and an intuitive interface really give it the upper hand.

splendideyetorture

Newbie Joined: Mar 10, 2022 20:43 Messages: 5 Offline

Mar 13, 2022 14:45

Yes, it's lagging and seems to run at a low frame rate i.e. 15 fps or so - not realtime (even when that is selected), and full frame.

I have enabled Hardware Decoding, OpenCL and Shadow but still no joy, plus different combinations, which all give the same result.

I have converted a clip to constant through hand brake and no difference.

Again, the clips play/fast forward/rewind perfect when not navigating through the timeline, so definitely an issue there.

I'm not willing to pay for a subscription, even if I can cancel/get my money refunded, the free trial is here to try it before going for the full version, so should be working now.

Quote I'm not sure what you mean by the lagging "when navigating back and forth along the timeline." Are you clicking on new clips and waiting for the preview to catch up?

You should be able to use Full HD preview mode and should have Hardware Decoding and OpenCL turned on. The reason StevenG asked about your specific clips is that PD sometimes has difficulty when working with variable framerate clips, and many phone videos are recorded that way.

You can help us help you by following the steps in the 3rd paragraph in this post and attaching the video details. If the clips use variable frame rates, try converting one to a fixed rate using the free Handbrake tool as that will let you know straight away if that's the issue.

You can also try using shadow files and wait for the little yellow icons on the clips in the media library to turn green to let you know that they're fully ready. You can edit before they're finished but the lagging might still be present.

Finally, the trial version has many built-in limitations that the full version doesn't suffer from. You might want to at least consider uninstalling it then paying for the subscription version and giving it a trial run. CL has a 30-day money back guarantee so you won't be out any money if the full version doesn't meet your needs.