Quote
I've never seen SVRT create a compatible profile for all I frame if that's what you really have, you need to create that profile manually. As a starter, you can use a SVRT generated profile and then modify the profile.ini file to adjust. Verify what you have with MediaInfo.
The 3 bitrate choices are probably because you have multiple clips in the timeline which are variable bitrate and some differences between them. Put a single clip in the timeline and you will probably end up with just 1 bitrate profile.
CPU encoding > do not check any form of "Fast video rendering technology:" on the "Produce" page
CPU decoding > do not check "Enable hardware decoding" in pref > Hardware Acceleration
Jeff
thanks again Jeff
ok got it no checking those boxes, when i select the default (1920 x 1280 24p the details shows they are seleting a bit of 15500000.
is that good? or should I try to imput a higher rate? tanx!
UPDATE: here is where I am at
made sure nothing was checked, made sure audio is at 384, went tothe max of variable bitrate where powerdirector allows me @ 60000000, uploaded to youtube looks much better but same audio dropps here and there. I am at a loss. If i use the default setting it works fine but doesn't look as good.
If i use SVRT to see the profile which is much larger bit @ 51133184 however the audio is @ 128 if I try to change it to 384 then the varible bit rate come in and says I have to choose bewteen 30000-600000 . So there is the other problem from what i understand you need 384 . again I am at a loss. defeated ,stuck with no solutions.
This message was edited 2 times. Last update was at Jul 15. 2020 14:16