Quote: Hello

Each time you open the module I capture a crash with this window that opens.
Impossible to capture, it starts badly.
I think the capture module is a real dung.
thank you for your help.

Traduction Google

http://cjoint.com/?BEeoO79PhtN

Bonjour

A chaque ouverture du module capture j'ai un crash avec cette fenêtre qui s'ouvre.
Donc impossible de capturer, ça commence mal.
Je pense que le module de capture est une vraie bouse.
merci de votre aide.

Do you have the latest Quicktime installed?

Is your Video Card software the latest from the manufacturer?

If you have trouble in the Capture Module, maybe you don't have the correct driver.
Carl312: Windows 10 64-bit 8 GB RAM,AMD Phenom II X4 965 3.4 GHz,ATI Radeon HD 5770 1GB,240GB SSD,two 1TB HDs.

Yes everything is updated
I try to capture through the USB files. TS A Camcorder Panasonic TM-60
thank you

Oui tout est à jour
J'essaye de capturer par la prise USB des fichiers .TS d'un camescope Panasonic TM-60
merci

Quote: Yes everything is updated
I try to capture through the USB files. TS A Camcorder Panasonic TM-60
thank you

Oui tout est à jour
J'essaye de capturer par la prise USB des fichiers .TS d'un camescope Panasonic TM-60
merci

I Think you have to use the Firewire connection to download the videos on that camera.

I think you can import still images via USB but not Videos.

And you have to use the Panasonic software to copy the videos from the camera to your hard drive.

Once you have the Video on your hard drive you can then Import into Powerdirector.

Read your Panasonic TM-60 operation manual at "With PC" in the contents.

Carl312: Windows 10 64-bit 8 GB RAM,AMD Phenom II X4 965 3.4 GHz,ATI Radeon HD 5770 1GB,240GB SSD,two 1TB HDs.

Hello
On the camcorder there are three strikes "HDMI, USB, MultiAV"
But I found the problem, improperly installed drivers from the camcorder.
I restored a partition image and reinstalled the camcorder to the usb port and now it works.
Thank you very much for the helping hand it's your job that put me on the way.

Bonjour
Sur le camescope il y a trois prises "HDMI,USB,MultiAV"
Mais j'ai trouvé le problème, Drivers du camescope mal installé.
J'ai restauré une image de la partition et réinstallé le camescope sur le port usb et maintenant ça fonctionne.
Merci beaucoup pour le coup de main c'est votre poste qui m'a mit sur la voie