|
|
Some more testing.... Nero 8 doesn't work either.
Tried a DVD+RW, no problem.
Then tried the BD-RE disc (branded LG) that came with the drive, and .... OK. Takes long to write 22.5GB (about 80 minutes!), but hey, faster media will arrive in the near future.
So it seems it is an unknown media-code issue, which I presume, new firmware of the drive will resolve.
Log of the BD-RE:
OS Version : Vista Personal Service Pack 1
C:\Program Files (x86)\CyberLink\Power2Go\Power2Go.exe : Version 5.50.3209
CBS.dll : Version 7.7.2003
==================================================================
Total physical memory : 4086MB (4184396KB)
Free physical memory : 1990MB (2038520KB)
Memory load : 51 percent
Number of CPU : 2
CPU Name : Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz
CPU Speed : 2394 MHz
==================================================================
1.8.2008
Task Type : Data Disc
17:23:10, File(cl_DVDData.cpp), Line(191)
-> Begin burning process
Current drive: <F: HL-DT-ST BD-RE BE06LU10 YE03>
Current writing speed(x): 2.0
====== Disc Info =======
Disc Type: BD-RE
Disc Status: Blank, Appendable
Num. of Sessions: 1 Num. of Tracks: 1
Disc Capacity: 11826176LBs
Free Size: 11826176LBs Used Size: 0LBs
========================
Burn option: w/ buffer underrun protection
Burn option: w/o simulation
Burn option: w/o close disc
Burn option: w/o verify disc
FS type: UDF_150
Burn mode: PACKET_INC
17:23:40, file(cl_DVDData.cpp), line(3056)
-> Begin new track: 1
17:23:40, file(cl_DVDData.cpp), line(3087)
-> Write data
Last write LBA: 10755200
18:45:42, file(cl_DVDData.cpp), line(3204)
-> Update 2nd AVDP
18:45:43, file(cl_DVDData.cpp), line(3227)
-> End new track
18:45:43, file(cl_DVDData.cpp), line(3237)
-> Close disc
18:45:43, File(cl_DVDData.cpp), Line(305)
-> End burning process
==================================================================
|
|
|
Same problem here with an external LG BE06LU10 (firmware YE03, have not found any firmware on the net). Using a platinum BD-RE, trying to make a data BD with 13.8GB of datafiles. Using UDF 2.5, defect management enabled or disabled makes no diff. Error occurs seconds after pressing the burn-button.
Cause I don't see a solution here (besides replacing the drive....) I post here also.
Log:
OS Version : Vista Personal Service Pack 1
C:\Program Files (x86)\CyberLink\Power2Go\Power2Go.exe : Version 5.50.3209
CBS.dll : Version 7.7.2003
==================================================================
Total physical memory : 4086MB (4184396KB)
Free physical memory : 1941MB (1988032KB)
Memory load : 52 percent
Number of CPU : 2
CPU Name : Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz
CPU Speed : 2394 MHz
==================================================================
1.8.2008
Task Type : Data Disc
10:48:11, File(cl_DVDData.cpp), Line(191)
-> Begin burning process
Current drive: <F: HL-DT-ST BD-RE BE06LU10 YE03>
Current writing speed(x): 2.0
====== Disc Info =======
Disc Type: BD-RE
Disc Status: Blank, Appendable
Num. of Sessions: 1 Num. of Tracks: 1
Disc Capacity: 11826176LBs
Free Size: 11826176LBs Used Size: 0LBs
========================
Burn option: w/ buffer underrun protection
Burn option: w/o simulation
Burn option: w/o close disc
Burn option: w/o verify disc
FS type: UDF_150
Burn mode: PACKET_INC
10:48:15, file(cl_DVDData.cpp), line(3056)
-> Begin new track: 1
10:48:15, file(cl_DVDData.cpp), line(3087)
-> Write data
CDVDData: BurnDiscFunc: Error, hr = 4278399232
Last write LBA: 0
10:48:15, file(cl_DVDData.cpp), line(3227)
-> End new track
10:48:15, File(cl_DVDData.cpp), Line(305)
-> Burning Fail, ErrCode: 0xeb020b88
==================================================================
Error Code : 0xeb020b88
|
|
|
