|
|
|
Quote:
Hello, Max!
Barry The Crab has clearly sorted things out for you! The problem with "Normalise" being greyed out and also not being available upon right-clicking on the audio track lay in the fact that you were using a DE version of PD12, the very bottom end of the range in each version. It is more than likely you got this version bundled in with an analogue-to-digital capture device(advertised with blurb: "Turn your old VHS tapes into DVDs!"). These low-end versions are otherwise referred to as, or are similar to OEM versions and, as pointed out elsewhere, lack several of the features normally found in the "full" versions normally bought as Power Director packages in their own right(Delux through to Ultimate). These DE or OEM versions can really restrict you in what you want to do when editing video. It's always the far better option to go with the "full" version(Deluxe up to Ultimte) in Power Director, right up to PD14, that way you're not missing out on features which may prove vital for what you're trying to achieve, like normalising audio levels for a start. In the meantime, there is, as Barry suggested, Levelator, which will sort out your audio levels for now.
Cheers!
Neil.
The PD12 DE actually came with the HP Envy laptop I purchased. I was already sold on the laptop and thought that PD12 was icing on the cake. Bummed to find out it's not a better version. The upgrade cost to PD14 Ultra was around $70 I believe. I won't need all of the features, but I'm sure there are some that will be worth it.
|
|
|
|
Quote:
Of course, Max, if you think you may decide to pursue video editing then you'd be better served and have more fun with an upgraded version of PD. Opinion, and somewhat related to hardware, but I don't want to stray too far from the original topic.
Thx Barry. The levelator seems to have worked well. Certainly was a workaround - I had to unlink 20 videos, remove the audio portions, import the levelator produce file, and split / link the 20 files again. I wanted to use transaitions between each clip, which caused more rework than necessary.
Ultimately I think the results will be better and smoother than my manual audio edits.
Thx again!
|
|
|
|
Quote:
Max,
if you are unwilling or unable to upgrade to a higher version of PD, I think I may have a solution, workaround actually.
On my site is a link to Levelator, a free program that will take "erratic" audio levels and equalize them to similar volumes. A key here is if your version of PD can extract audio from video.
The workflow would be...
Produce your video to a file, you may consider muting any added music.
Start a new project (in PD) bring your new completed video file into the library of your new project.
Right click the file in the library and if possible extract the audio.
If your version cannot extract audio, stop reading this.
But...
If you CAN extract the audio as a new distinct file, you can then run that audio file in Levelator, there are no settings or controls in Levelator, it just does one thing very well, it lowers loud sounds and raises meek sounds, and you end up with a new audio file with smoother more consistent audio levels throughout. You can also run the new audio file through Levelator again if you think another round would yield better results. I did just that with a 4 camera shoot in a very large room and the results were excellent.
NOTE: This was educational for me, I did not know Normalize could work across multiple tracks simultaneously.
Thx Barry! I'll give it a shot. I am able to produce audio in my PD12 version, so I assume I'm good to go.
|
|
|
Quote:
Quote:
I have PD12 version 12.0.5.4601
That normalize button on the audio mixer does not appear on my version.
Can you post a pic of your "About Cyberlink PowerDirector", that version number you state does not make sense. I'm suspecting you have a neutered version like HE3D or something. The whole pic would help clarify, similar to what I had posted early that clearly states "PowerDirector Ultimate" in my case.
Obviously you don't have the feature in your version, knowing why may help your next purchase.
Jeff
|
|
|
Quote:
Quote:
Hello, JL_JL & Max Stacks!
I think it might be that while the video track is on the timeline, you right-click on the audio portion for the "normalise" option.
If you want to use the timeline functionality of normalize, then make sure all video clips desired are selected as it operates on selected clips, not the entire single track audio like the "Mixing Room" does. If all the clips are selected across multiple tracks (Ctrl a) then timeline normalization is done on selected and highlighted clips. Since clips are highlighted, right mouse click anywhere on the clip for normalize in the menu.
Jeff
Thx for the tip, but I don't see a normalize option after rt-click'ng the audio portion.
|
|
|
|
Quote:
I'm not aware that feature is PD12 version dependent but it could be. I couldn't immediately find any asterisk notation in the manual indicating it might not be in all versions. What PD12 version do you have?
Jeff
I have PD12 version 12.0.5.4601
That normalize button on the audio mixer does not appear on my version.
|
|
|
|
Quote:
If clips are on the same audio track the "Normalize" in the "Audio Mixing Room" (F9) may yield satisfactory results. It does work across all clips on the given track.
Jeff
Thx for the reply. I don't see an option for 'Normalize". When I click on the audio mixing room I only see 4 bars to adjust volume for 1 clip at a time.
|
|
|
Greetings.
I have 10 clips in my project with varying volume levels. I know how to edit manually, but I was wondering if there's an easier way to equalize the volumes on all clips?
Thanks!
|
|
|
|
Quote:
http://bgillcyberstudio.com/barry_gill_cyber_studio_002.htm
You will find links to three good free converter on my site. There are many more on the web.
Thanks!
Ooh, HandBrake! I used that years ago. I'll give that a try instead of VLC.
Thx again!
|
|
|
Quote:
Quote:
Quote:
Max_Stacks,
welcome to the Forum.
Sorry to say if the file types are not listed and you cannot bring them into your program/timeline, then conversion is the only method. If you have a short clip perhaps you could upload it here and one of us can determine a good conversion.
thx for reply. I can just use VLC to convert to a format that will work. I'll just have to deal w/ the loss of quality.
There are better file converters than VLC.
You can convert video files with little or no loss in quality.
Do a search for "video file conerter" without the quotes.
There are several options after searching for that term. Can you let me know what product you recommend for file conversions?
|
|
|
|
Quote:
Max_Stacks,
welcome to the Forum.
Sorry to say if the file types are not listed and you cannot bring them into your program/timeline, then conversion is the only method. If you have a short clip perhaps you could upload it here and one of us can determine a good conversion.
thx for reply. I can just use VLC to convert to a format that will work. I'll just have to deal w/ the loss of quality.
|
|
|
Greetings.
I have videos with the codec VP8 or VP80. These videos are not able to be loaded into PD12. Are there any solutions w/o converting the video files?
Thx!
|
