|
|
|
А помилку з тим что, що багатоканальний LPCM при настройці "недекодоване аудіо" вивовде як стерео. Ніяк. Скільки вже писати можна...
|
|
|
|
I have so herself instead of 5.1 or 7.1 gives 2.0 only when switched to decode LPCM then gud. And yes. He wrote long ago this sense 0.
|
|
|
|
sound LPCM 5.1 or 7.1 on blu-ray sound when LPCM 2.0, setting not encode HD sound issues as helping only change the settings in the PCM coded. Correct please not in the first assembly of such a defect.
|
|
|
|
About a similar problem I have already written http://forum.cyberlink.com/forum/posts/list/39492.page that would be correct vossproizvesti LPCM 5.1 / 7.1 need in the settings tab select the sound encoded in LPCM stereo otherwise only be 2.0. The problem of razdyada on sіlke my vіshe that automatically tincture not vіbirayutsya in starіh version is approx.
|
|
|
|
Hurried, only works if you start with a m2ts file DTS-HD MA but if the whole BDMV folder or disk that silence there is no sound.
|
|
|
|
Hurried, only works if you start with a m2ts file DTS-HD MA but if the whole BDMV folder or disk that silence there is no sound.
|
|
|
|
Helped me to update everything works as it should configure your wrote above.
|
|
|
""2. Resolves the issue that there is no audio output when bit streaming non-decoded DTS-HD audio over HDMI. ""
Good work
|
|
|
|
Tell at least roughly correct this problem when simply impossible to Use.
|
|
|
http://forum.cyberlink.com/forum/posts/list/39271.page
I have the same problem
|
|
|
|
And I dts-hd ma no bitystream
|
|
|
|
When playing Blu-ray all ok, but when playing a DVD no matter from the disk or folder with. Preset the sound when selecting HDMI (bitstream on Pioneer 1123) contribution SETUP encoding is always set to convert the sound into PCM. Manually put forward flow DD / DTS plays correctly. Worth close the program and reopen it, and start playing again encodes PCM until manually will not change ?
|
|
|
|
This problem http://forum.cyberlink.com/forum/posts/list/39271.page actualy
|
|
|
|
I have the same problem on the very first version of the assembly 14 everything worked well for 4028 and 4206 beta bitstream DTS-HD sound just no. All other formats work. On 13 version is also doing well. Wrote in support of the sane response is not received. Receiver Pioneer VSX-1123 and R9 290
|
