|
|
|
That is totally self-defeating cutting the speed in half. That is also not the answer to the problem. What I did was clean up my system HD so that I had in excess of 50G overhead and I was able to cache the whole project so there was no interruption in write speed.
|
|
|
1. Power2Go LEP 6.1.0.3802
2. SR Number CDS100524-01
3. DXDIAG log file not found on computer
4. LiteOn iHBS212 BD-RE DL
5. Verbatim DR-R DL 50GB 6X optical discs
|
|
|
And I am getting the same error using P2G v6.1.0.3802, writing to a LiteOn iHBS212 BD-RE DL on A Win7 64-bit system with a Core i7 930 (2.8GHz) CPU, Gigabyte X58A-UD5 mobo, 12G DDR3-1600 RAM, and an nVidia Quadro FX3800 graphics card.
What gives? I have plenty enough power and speed for the task, but keep spoiling Verbatim BD-R DL 50G Blu-Ray disks.
Free physical memory : 10185MB (10429940KB)
Memory load : 17 percent
Number of CPU : 8
CPU Name : Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz
CPU Speed : 2793 MHz
==================================================================
16.6.2011
Task Type : Data Disc
17:56:33, File(cl_DVDData.cpp), Line(199)
-> Begin burning process
Current drive: <D: ATAPI iHBS212 2 5L09>
Current writing speed(x): 6.0
====== Disc Info =======
Disc Type: BD-R Sequential Recording
Disc Status: Blank, Appendable
Num. of Sessions: 1 Num. of Tracks: 1
Disc Capacity: 24307712LBs
Free Size: 24307712LBs Used Size: 0LBs
========================
Burn option: w/ buffer underrun protection
Burn option: w/o simulation
Burn option: w/ close disc
Burn option: w/ verify disc
FS type: UDF_200
Burn mode: PACKET_INC
17:56:33, file(cl_DVDData.cpp), line(3441)
-> Begin new track: 1
17:56:33, file(cl_DVDData.cpp), line(3472)
-> Write data
Last write LBA: 20302400
19:07:31, file(cl_DVDData.cpp), line(3629)
-> End new track
19:07:31, File(cl_DVDData.cpp), Line(315)
-> Burning Fail, ErrCode: 0xeb020b88
==================================================================
Error Code : 0xeb020b88
|
|
|
