|
|
Hi Neil.f.1955,
Thanks again for your response. I checked the DVD player manual and there are no options for other color systems or PAL. It is an older unit and was not very expensive. The DVD from Sweden is a single layer. I am glad you are having good results with PD. I have enjoyed using it, PD allows one to be very creative.
Thanks again for your information.
Martinray
|
|
|
Hi Neil.f.1955,
Thanks for the information - very interesting. I did create a DVD specifying PAL in the two options I mentioned.
It played just fine on my computer.
Then I tried my DVD player. It would play but no color, just black and white. I also noticed a blinking. I think it has to do with frame difference, PAL is 25 frames, NTSC is 30 frames. So I assume it is how the DVD player handles it. A DVD created by our cousins in Sweden will not play on my DVD player but would on my brothers DVD player.
Thanks again for the info.
|
|
|
Jaime-esque
Thank you for the response. I will go with it.
Martinray
|
|
|
Hello,
I have a question about TV format. But first I want to thank those who take their time to answer questions and help those of us that are less experienced.
I want to create a DVD for use in Sweden. I can't check it before I mail it to Sweden, my DVD player doesn't do Sweden(PAL) very well. So I want to do everything I can to be sure it works. I can find 2 places to set the option to PAL:
1. In EDIT mode, in settings, under the general tab, there is the "TV Format" option where I can select "PAL".
2. In PRODUCE mode, there is "Country/Video format of disc" option where I can select "Sweden(PAL)".
I am creating the DVD as MPEG-2 format.
Questions:
Are these the only changes I need to make or is there something else I am missing?
Any other issues or clinkers I should know about?
I am using P.D. 9 Ultra64 9.0.0.3305
Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
Dell Computer Corporation
System Model Dimension 4600i
System Type X86-based PC
Processor Intel Pentium 4 3 Ghz
Memory 4 GB
Thank you,
Martinray
|
|
|
Hello All,
I installed the trial version and was ready to purchase and was confused about how to migrate from the trial version to the purchased version. I submitted the question to Customer Support. Following is the answer I received. After the purchase, I had no trouble with the download. I think I went to the orders page. Hope this helps.
Martin
Customer Support Response 2011/02/24 14:02
Dear Martin,
Thank you for contacting CyberLink Technical Support.
I understand your concern related with PowerDirector software installation.
In response to your issue please note that PowerDirector 9 full version installation is an full install.
It will automatically detect and remove the trial version software.
In case you face any issues with the installation you can contact is back to get the cleanup tool.
Please feel free to contact us back for any further clarification or for any assistance related to CyberLink Products. Use the below mentioned link to get back to us for your further queries:
http://www.CyberLink.com/english/cs/support/form/index.jsp
Thanks and Regards
Piyush
CyberLink Technical Support
|
