AVerMedia USB HD DVR and PD15

MEH_PDX

Newbie Joined: Aug 08, 2014 02:24 Messages: 9 Offline

Solved by

Jul 24, 2017 17:43

I have an Avermedia capture device that I would like to use with Power Director 15. However, it is not being recognized as a capture device by PD15.

The Avermedia came with ArcSoft software and it works OK. But I was hoping to capture directly into PD15.

Is there a setting that I need to flip on somewhere to make this work?

Thanks,

Mike

tomasc

Senior Contributor Joined: Aug 25, 2011 12:33 Messages: 6464 Offline

Jul 25, 2017 12:07

You did not supply enough information that this is a tv tuner or vhs capture device. Of course, it has to be set up properly in PD15 in order for it to work. All this can be bypassed by simply using the Arcsoft software to capture and then import it to PD15 for editing.

Eugen157

Senior Contributor Location: Palm Springs area, So.CA Joined: Dec 10, 2012 13:57 Messages: 662 Offline

Jul 25, 2017 23:25

I use that device to record HD component RGB from a cable tuner, then import the video file into PD14 and edit. Works well in HD.

After typing the above I looked in PD and it does not show here either. But no big deal

Eugene

This message was edited 2 times. Last update was at Jul 25. 2017 23:54

73s, WA6JZN ex DL9GC
CYBERLINK PLEASE ADD UHD BLU RAY BURNING SOFTWARE
PD14,
Win10,64bit.CPU i7 6700,16GB ,C= 480 GB SSD ,GPU GTX1060 6GB 1 fan. Plus 3 int, 4 ext HDD's for video etc.LG WH16NS40 reads UHD.
4K 24" ViewSonic monitor.Camera Sony FDR-A

MEH_PDX

Newbie Joined: Aug 08, 2014 02:24 Messages: 9 Offline

Jul 26, 2017 11:19

Quote You did not supply enough information that this is a tv tuner or vhs capture device. Of course, it has to be set up properly in PD15 in order for it to work. All this can be bypassed by simply using the Arcsoft software to capture and then import it to PD15 for editing.

Yes, that is how I'm doing it currently. Like I said "But I was hoping to capture directly into PD15."

Here's more info, this Avermedia device takes an analog video input (component or composite) and converts it to digital output over USB to the computer and the Arcsoft software saves it as a .TS video file (MPEG format AVC)

The real question is why doesn't PD15 recognise the Avermedia as a valid capture device? I have the Avermedia driver installed and it works properly with the Arcsoft software.

Thanks for any input.