CyberLink Community Forum
where the experts meet
| Advanced Search >
No OpenCL hw accelleration in produce using AMD videocard
Reply to this topic
david445 [Avatar]
Member Private Message Joined: Oct 30, 2012 05:28 Messages: 129 Offline
[Post New]
Producing AVCHD, PAL, 1920x1080 50i, 24Mbps

Video card AMD HD7950Boost, driver 14.12 AMD Catalyst Omega

Using PD Ultimate 12.0.3403.0

The only available hw accelleration is Intel QuickSync, that's correct?

This message was edited 2 times. Last update was at Jun 04. 2015 11:38

Reply
Carl312
Senior Contributor Private Message Location: Texas, USA Joined: Mar 16, 2010 20:11 Messages: 9055 Offline
[Post New]
Quote: Producing AVCHD, PAL, 1920x1080 50i, 24Mbps

Video card AMD HD7950Boost, driver 14.12 AMD Catalyst Omega

Using PD Ultimate 12.0.3403.0

The only available hw accelleration is Intel QuickSync, that's correct?
If Intel QuickSync is the default video device in your computers BIOS, that very likely is correct.

There may be a BIOS setting to use the Amd Catalyst Omega card on demand.

Certainly nothing wrong with using Intel QuickSync for video rendering, if your do not get artifacts. Windows 7 64-bit 8 GB RAM,AMD Phenom II X4 965 3.4 GHz,ATI Radeon HD 5770 1 GB,256GB SSD,1TB HD.
http://www.carlmcmillan.com
Not responsible for any harm that may come to your wallet
Reply
tomasc [Avatar]
Senior Contributor Private Message Joined: Aug 25, 2011 12:33 Messages: 4824 Offline
[Post New]
If you have a late I5 or I7 cpu with an intel MB, then you can have the monitor connected to mb and still use the AMD card for acceleration but you need the driver installed. You do the settings in the bios.
Reply
Reply to this topic
Powered by JForum 2.1.8 © JForum Team