Hi George, Carl and everyone else,

I have received a heartening reply regarding the rendering problem from Dafydd in the PowerDirector 11 forum: "Patch from CyberLink, certainly being worked on and will be released asap. - Forum Moderator"

Workaround

Hi Herp, as explained in the PowerDirector 11 forum, I tried out the new nVidia driver, Version 306.97 in my PD11 Ultra trial, but the rendering problem continued. I followed the workaround suggested in that forum and disabled CUDA for PD11 in the nVidia control panel. The workaround enables me to use PD11 without any rendering problems, but without CUDA hardware acceleration. You right-click the desktop for the nVidia Control Panel, click on Manage 3D Settings, click the Program Settings tab, Click Add, browse for the set-up file for your version of PowerDirector under Programs, click that set-up file, and you see it appear at the top of page. Then you look down the page for CUDA, and click the arrow, then click the circle next to the UNTICKED box. This disables CUDA. Presto, PowerDirector works again without continuous rendering (though without CUDA acceleration). It sounds like we won't need the workaround for long, and will soon be able to use our late model nVidia graphics cards with PD9, 10 and 11. (The nVidia installer won't let you use the older driver Version 301.42 with those latest cards.) Anyway, patch coming - Phil

Hi everyone, if you are wondering why I was sharing that workaround that applied with PD11, I think it applies with PD9 and 10 as well. You will need it to use PD9 or 10 if you have installed the newest nVidia graphics cards because the nVidia installer won't let you install the older driver Version 301.42 with those very recent cards such as the GTX 650. You will still have continuous rendering with the 306.23 and latest 306.97 drivers. However, disabling CUDA will be a workaround and we have been assured that the patch is coming.

I hope that patch will not be for PD11 only, since with the workaround, we will lose some speed and "goodies" of the card.
Thanks all,
Thanos

Hi,
I was directed to this post by Carl as I posted the same problem in the version 9 section, which is the one I have. We recently updated our nVidia card and it was a coincidence that I had looked at a tutorial about SVRT, rendering as you go around the same time. It looked a good idea and I switched it on. As soon as I put my new footage in the timeline it started. Big mistake. Apart from its painful slowness, what it did was unwatchable, equally, it ws rendering before I had even edited out footage I didnt want.

I unticked the boxes in the preferences section relating to SVRT and enable Cuda to no avail.

Carl suggested rolling back the graphic card update, but hubby was not happy with that, understandably, the workaround sounded the next best thing.

However, I followed the instructions but the Programme did not appear in the options to choose, so I clicked on Add and another box came up with a long list of things, mostly one to three letters. I cannot work out which would be the Power Director one.

SO my question is, please can you tell me which one it could be.

Also, has anyone any clue when the patch will be available and how we will know it is available?

Many thanks
Joanie

New patch allows CUDA hardware acceleration in PD11 using latest nVidia card, Geforce GTX 650 with new 306.97 drivers. I hope the issue has been equally resolved in PD9 and 10 - Phil

Hi Phil,
There was nothing in the download update section for version 9 - just checking - is that where you find the patch? I have never had any updates automatically downloaded.

I have been wondering whether to upgrade to 11.....
Joanie

Hi Joanie, it looks to me as if there won't be patches for PowerDirector 9 and 10. Here is the link that I followed for the PD11 patch. You will see that the latest update for PD9 was September 16 2011:

http://www.cyberlink.com/downloads/support/powerdirector-ultra/patches_en_US.html

It looks like you might have to upgrade to version 11. I found it well worthwhile upgrading from PD8. PD11 is much bigger, especially if you go for the Ultimate version, with all of the templates. For hardware acceleration that improves preview quality as well, I think you need at least the Ultra version, with the True Velocity Engine. You can burn BluRay and AVCH discs in Ultra and Ultimate, but not in Deluxe version. In PD11, Trimming is simpler. Adjustable workspace enables you to see wave patterns clearly. These are among the many helpful improvements (and I'm just a user - nothing to do with Cyberlink). I particularly like the keyframes (which Adobe Premiere Elements has always included). You can drag these keyframes when you expand the wave patterns and video tracks in the timeline to adjust sound levels and create video fades. Very intuitive. Hope you will like PD11. - Phil

So youre saying the solution for us is to pay 130 euroes++

Rather than you Cyber actually fixing 9 and 10 in less than a day?!


Better off using AVS Video Editor or something else, Sony Vegas, Premiere, VirtualDub and what not.
Where the people behind the softwares, actually support them too. System Specs: Gigabyte GTX 680 2GB w/ Twin Turbo II | 8GB GSkill RAM 1600MHz | Intel Core i5 2500K @ 4.2GHz | Gigabyte Z68X-UD3H B3 | Corsair TX650W | Define R3 | 1x 1TB WD Blue | 1x 1TB WD Green | 1x 2TB WD Green | 1x 500GB WD Blue | 1x 250GB Samsung | 1x 60GB Corsair Force 3 | 1x BENQ G2220HD | 1x BENQ G2400W | 1x LG IPS277L

Thanks sheltiephil, You have made my mind up!! I had been thinking of it anyway but wasnt sure if it was worth it.
I appreciate your response,
Kind regards
Joanie

To anyone thinking of trying AVS Video Editor you might be interested to visit this website. Regards,
Mike

Home-build system:
Intel Core i5 Quad Core 3.3GHz, 2 x 4GB DDR3 1333MHz,
Asus Nvidia GT440 1GB, 2 x Western Digital WD10EARS 1TB, 1 x Seagate ST1000DM010 1TB,
Windows 7 Prof 64-bit, PD 9 Ultra 64, PD 13 Ultimate 64

Hi Fenman , Mmmmm - interesting, seems like the video driver problem has been evident with PD9/10 & 11 as questioned in a number of posts under different /similar headings.

Thanks for your comments on my previous posting - Its nice (yet dissapointing) to know we`re not on our own ! .

Just one thing I cant understand is if CL can fix the problem on PD10 & PD11 - Why not PD9

Precisely. It appears to be a commercial, rather than technical, decision. Regards,
Mike

Home-build system:
Intel Core i5 Quad Core 3.3GHz, 2 x 4GB DDR3 1333MHz,
Asus Nvidia GT440 1GB, 2 x Western Digital WD10EARS 1TB, 1 x Seagate ST1000DM010 1TB,
Windows 7 Prof 64-bit, PD 9 Ultra 64, PD 13 Ultimate 64

I still cant use CUDA in PD11.
I can only use Intels crap, which is slower. System Specs: Gigabyte GTX 680 2GB w/ Twin Turbo II | 8GB GSkill RAM 1600MHz | Intel Core i5 2500K @ 4.2GHz | Gigabyte Z68X-UD3H B3 | Corsair TX650W | Define R3 | 1x 1TB WD Blue | 1x 1TB WD Green | 1x 2TB WD Green | 1x 500GB WD Blue | 1x 250GB Samsung | 1x 60GB Corsair Force 3 | 1x BENQ G2220HD | 1x BENQ G2400W | 1x LG IPS277L

NVidia driver 320.18 doesn't work either. Going back to 301.42 to get PD9 to work means other software won't run as well. The drivers were updated to improve how the graphics cards work. It takes about a half hour to swap over video card drivers, so its impractical.
Cyberlink apparently made patches for PD 11 and PD 10, but won't do the same for PD 9 or earlier. They have suggested that it is up to NVidia to revise their drivers.

The lack of support from Cyberlink is appalling. Beware if you have just paid for PD11. When PD12 is released PD11 will no longer be supported. And Cyberlink won't tell you either. i7 3820, Asrock X79 Extreme 3, 16GB 2133 G Skill, 2 x GTX560, Corsair TX750V2, Sandisk 120GB SSD, Barracuda 2TB HDD, PD9

I realise as the PDR forum moderator, PD9 users are upset that when they update their Nvidia drivers to the latest, their editing experience is awful. I made representations over the issue at the time it was known for PDR11, 10 and 9. PDR9 in Video Editing terms is an old program and is unlikely (very unlikely) to have any changes/patches released for it. The solution is to revert to earlier drivers or purchase the latest PDR - a very different animal to PDR9.

I'm locking this thread as it isn't getting anywhere and PDR9 will not in my view have any patch release. If it does, I'll post on the PDR9 forum.

Dafydd