Hi,
Thank you for the information.

Please can you state what version of PD9 you're using and provide a diagnostic file and a sample of the video - unedited/unchanged and state what camera/source the material has come from (5 to 10 seconds)? See links to guides and information below which will assist you.
Thank you
Dafydd

Oridin,

Before you start doing all that uninstall and reinstall stuff.... give us time to see whats going on. If most things work, just wait a bit.

I tried to replicate your issue. I had no problems rendering a good video. What did you have the video enhanced degree set to? Also did you try it with the supplied nature video? I tried 3 different video clips. If you have a 10 or 20 second sample of one that is causing you the problem could you attach it?

I went back and played with it some more. Here is a clip with the video enhancement at 90 percent which actually makes the video look crappy.





__________________________________________
Windows 8 Pro 64 bit

CyberLink PowerDirector 10 Tutorials
PDtoots PowerDirector Tutorials

**NOTICE**
When you are asked to provide a DXDIAG you go the following link and do part "B". Your posted specs are NOT what we are looking for as they tell us nothing. The specs on the box of your computer mean nothing. The DXDIAG shows us how your computer is configured as it runs.

DXDIAG Link

Hi again,

Thanks for the replies. I reformatted my computer last night and installed Windows 7 64bit. This has fixed the problem.

Bit more info regarding the issue incase others come across it?

I was using windows 7 32bit OS with Power Director 9 64bit << not sure of version number??
During the install i had some issues - i think it was because i had installed the trial version then paid for it fully and installed the new version stratight away << not restarting my computer
My video was filmed with a GoPro HD which was set at 1080 <<< NTSC
I could render and produce the video with out any other dramas as long as the 'Video Enhancement' checkbox was unticked

1 last thing .. i was able to produce one video with the output set to 720p setting (not the 1080p default) << I probably could have been happy with that but decided i would just start fresh (I had only just reformatted anyway)

Hope this helps anyone down the track.

Thanks

Good to know.
Thank you
Dafydd

How did you force a 64bit program to install on a 32bit Operating System? RTX 2060 SUPER 8GB GDDR6
(2 NVME 2TB, 1 SSD 2TB, 3SATA 18TB )
PD18 ULTIMATE 64bit
WINDOWS 10 PRO 64 BIT
GIGABYTE X570 AORUS PRO WIFI MB
RYZEN 7 3700X 8-CORE , 64 GB DDR4
ORSAIR HX1050 watts PSU

He didn't - it's just the naming of the program, my guess.
Dafydd

pls could u tell me how to clear the black image ...

Hi!

I have the same problem: PDirector renders black (missing) video, sound is ok. This does not happen with the supplied nature.mpg. The video enchancement is Fix/enchance//Enchance//Color adjustment//Brightness//-25 (same happens with +11, or even if 0, ie. only 'Color adjustment' checked). Same happens with Enchance//Video enchancement, but is ok with 'White balance' adjustment. If I select 'compare video qualities in split window' then the pre-render looks ok, but after 'producing', the video is blank. File size shows there is no video iincluded (5 seconds 286kb for black vs. 3802kb for ok non-enchanced video).

Input file is from Sony A77 camera, H.264 AVC, 21.70 MBPS, frame rate 25, 16:9, Profile: high profile.

Bad output attached.

Any help welcome.

Kaido

vinothkumar & Kaido
Please start a new topic of your own.
See guide: http://forum.cyberlink.com/forum/posts/list/7958.page
New Topic: http://forum.cyberlink.com/forum/jforum.page?module=posts&action=insert&forum_id=67
thanks
Forum Moderator