CyberLink Community Forum
where the experts meet
| Advanced Search >
The Difference in the three 1920x1080 profiles under Blu-ray "Create Disc"
Reply to this topic
jmone
Senior Contributor Private Message Location: Australia Joined: Nov 26, 2010 00:05 Messages: 706 Offline
[Post New]
FYI, under Create Disc --> Disc Preferences --> Blu Ray --> Select Video Encoding format and quality, you can select the Video Encoding format (eg MPEG-2 or H.264) and the "Quality" but they are poorly marked as to the difference for the three HD1920x1080. From what I can see from the results of using the three profiles (and the BD Spec) they are as follows for H.264:
* HD 1920x1080 : Interlaced (for me 25fps) at around 16Mbps for the video stream
* HD 1920x1080p : Progressive 23.976fps at around 16Mbps for the video stream
* HD 1920x1080 (24Mbits) : Interlaced (for me 25fps) at around 22Mbps for the video stream

Thanks
Nathan PD 64 Bit-Win10 64 Bit-32GB RAM-80TB HDD
Sony FX6 - 500Mbps 4k/50p AVC-I HLG
Canon XF400 - 150Mbps 4k/50p AVC
GoPro Hero6 Black
Pana HS700-28Mbps 1080/50p AVC (High@L4.2)
Canon HV20-HDV 25Mbps 16:9 1440x1080/25p MPEG
Reply
Cap'n Kevin
Senior Contributor Private Message Location: Chebeague Island, Maine Joined: Dec 26, 2008 20:22 Messages: 2011 Offline
[Post New]
Hi Nathan .....it isn't very clear is it? Thanks for posting the details of the profiles.

Have you also explored the Add Custom profile button? You can then create some custom profiles and then use a name that describes the seetings in more detail under the Profile name description.

Kevin
[Thumb - Custom Profile setup.PNG]
 Filename
Custom Profile setup.PNG
[Disk]
 Description
 Filesize
71 Kbytes
 Downloaded:
207 time(s)

Check out PDtoots. PowerDirector Tutorials and more! Over 5,000 Subscribers.
Reply
jmone
Senior Contributor Private Message Location: Australia Joined: Nov 26, 2010 00:05 Messages: 706 Offline
[Post New]
Thanks Kevin, I had found the "Produce" Custom Profiles also the way to manually hack the ini file to bump up the specs to support smart rendering of the AVC 1080/50p clips from the Pana cams ( http://forum.cyberlink.com/forum/posts/list/14176.page ) , however I have not found where the details of the profiles for "Create Disc" are stored, described or if they are also editable.

This message was edited 1 time. Last update was at Nov 28. 2010 14:42

PD 64 Bit-Win10 64 Bit-32GB RAM-80TB HDD
Sony FX6 - 500Mbps 4k/50p AVC-I HLG
Canon XF400 - 150Mbps 4k/50p AVC
GoPro Hero6 Black
Pana HS700-28Mbps 1080/50p AVC (High@L4.2)
Canon HV20-HDV 25Mbps 16:9 1440x1080/25p MPEG
Reply
Reply to this topic
Powered by JForum 2.1.8 © JForum Team