After trimming in PowerDirector, when I go to save it, I see fixed options like:
- 1920x1080p, 24fps (11Mbps)
- 1920x1080p, 30fps (11Mbps)
1 - Is it possible to customize these options to say, 1920x1080p, 30fps (14Mbps), etc. ?
(Change the Mbps, or, any of the other parameters ?)
I had an MP4 video file : ~3GB, 1920x1080p, 29fps, ~13.6Mbps
After trimming, I picked "1920x1080p, 30fps (11Mbps)", but after saving it was : ~1.8GB, 1920x1080p, 29fps, 9.4Mbps !
(The reduced size is fine, but why wasn't it 11 Mbps as per the selected choice from the dropdown ?)
2 - So apparently the quality of the saved file (9.4 Mbps) can't be selected to be the same as the original (14 Mbps), nor is it the same as the dropdown selection (11 Mbps) after the save ?
-- Please see 2 attached snapshotsof Before & After file properties.
Filename | Before.JPG |
|
Description | BeforeTrim-13.6Mbps |
|
Filesize |
96 Kbytes
|
|
Downloaded: | 1 time(s) |
Filename | After.JPG |
|
Description | AfterTrim-9.4Mbps |
|
Filesize |
93 Kbytes
|
|
Downloaded: | 1 time(s) |