Hi jimgansett,
Please provide some additional information.
1. Look up the guide info: http://forum.cyberlink.com/forum/posts/list/7958.page and provide Part B please. It's for the diagnostic files we need.
2. Please give the Customer Support Ticket reference number - I can ask CyberLink Head Office to investigate.
3. What version of PowerDirector 9 (build number) are you upgrading from. Just fishing to see if you had the latest build and in case there was a problem from that starting point.

Dafydd

(Forum Moderator)

Hi Dayfdd, Before I do all that, let me just say that when I upgraded to 10 with 1129a I had the latest build which was 3305. Later when customer support asked me to upgrade with 1129b, I first had to reinstall PowerDirector 9 (from a CD) and forgot to update to build 3305 before trying the 1129b upgrade patch. SO, my question is: Would it be worthwhile, knowing that my second attempt at upgrade was done with PD9 at build 2701? I'd hate to try it and find out that I have to go all through the registry again. Thanks
In any event, the ticket number is CS001103586

Hi Jim,
I really don't know if it would have an effect. I don't think it should but I wanted to have the info. I'll ask CyberLink to investigate the support ticket and they may then take up the contact. Whatever happens, please post a followup as that'll help other members who find themselves in the same situation (I can make sure you get sorted also).

Please can you attach diagnostic files - they'd be useful to look at and to check your setup incase an issue has been missed?
http://forum.cyberlink.com/forum/posts/list/7958.page
Part B

Dafydd

Hi Jim,

I have been having the same problem myself so you are not alone. Don't have time at present to investigate but tried everything you have and do have other things to do rather than sorting problems for the tech guys who released this buggy and not exactly cheap upgrade.

Geoff

Hi,
Please read an FAQ I have been made aware of recently: http://www.cyberlink.com/prog/support/cs/product-faq-content.do?id=13709&prodId=4&prodVerId=930
Dafydd

HI Dafydd,
First of all, I appreciate your time and effort. Thank you. I had been directed to the link you mentioned in your last response by tech support. I am going to try once more (I guess I have the time to kill it in the registry if I have to do it again!) but if it doesn't work, I may just stick with Corel Video Pro X4, also fine program and one which actually works reliably for me like PDR 9. Too bad because based on my experience with PDR 9, the Cyberlink program is better.
Having read the response from DIXXY174, it is now obvious that my situation is not unique and tech support had better come up with a cause and a fix if they want Cyberlink to be trusted software.
After I reinstall PDR 10 (1129b), if and when it crashes I will send the file(s) you asked for if I can figure out how to do that. Thanks Dafydd

Hey Geoff,
Sorry to hear about you having the same problem. It is frustrating, isn't it? It just seems strange. PDR 9 runs flawlessly on my computer. PDR 10 just will not load consistantly. Once it happens, it never loads again until reinstall.
You know, I am wondering if the problem is with the upgrade. I mean, I wonder if I were to install PDR10 as a full stand-alone program from their CD (Which, I do not have, obviously), if this problem would go away, the problem being the upgrade patch. Hmmmmm.....

Take care, Geoff

Hi all,
I did not upgrade (purchased full Ultra version) and i am having the same problem. I also HAVE followed the suggested fix at http://www.cyberlink.com/prog/support/cs/product-faq-content.do?id=13709&prodId=4&prodVerId=930
but it has not helped me (in reference to Quicktime). I will generate a support question/ticked today myself as this will be the second time that this has happened and yes the first time i had re reinstall everything.
One question you may be able to answer now though is if i re-install everything do i need to have and re-install all patches or just the most recent patch ? I guess only the most recent patch otherwise Cyberlink would have to have links available to all old patches for this version ?

This situation is VERY VERY frustrating. I am a past Pinnacle user and yeah disappointed considering how goo this product looks/looked. Hope it can get sorted ASAP.
Thanks for your help,
Johno.

Sorry for spelling mistakes in a bit of a hurry should have proof read. Take care all and thanks in advance,
Johno.

Hi again, ok here is a copy of what i put in my support request.
"Hi, when i try to start PowerDirector the program crasher either before i get to the main PowerDirector interface or a few seconds after i get there.

I have Already followed the suggested guildlines in re-installing Quicktime, this has not helped. (re-installed from the quicktime installer that was from the compressed PDR10 installation file)

The Cyberlink Issue Reporter Did Not appear either.

However following the support guideline "What can I do when CyberLink PowerDirector 10 crashes?", I also tried to generate an Event log, however no Error event log was generated when Powerdirector crashed, so i cannot submit one for you.

The last time (this is the second time this has happened) this occured i had to re-install everything, this is VERY annoying and frustrating.

Please provide some help that actually works.

Thankyou,
John."

The ticket ID is:- CS001106454
Nothing else on my computers is crashing atm, this system runs stably without dramas such as PDR10 is having.

regards,
Johno.

SEE, here is an example of why it is so frustrating to work with Cyberlink tech support. Always sent to the same @$# page which, having not worked once, certainly wouldn't work the second time.
HERE IS THE LATEST: Originally, I was told that to use the 1129b Version 10 upgrade, PowerDirector 9 HAD to be on the computer, which seems to make sense since 1129b was an upgrade file. NOW, after numerous failures, Cyberlink tech support tells me that PowerDirector 9 CAN'T be on the computer, so delete it and run the upgrade. Arrrrrr......
I hate to say it, but so far I give Cyberlink tech support a 1 out of 10. And they only get the 1 because they actually answer the ticket, even though they have offered no successful solution. Well, I'm off to try their latest as mentioned above, and if it doesn't work, I'll stick with Corel Visual Studio X4 Pro because at least it actually works all the time. I prefer Cyberlink WHEN it works, that's why it's a shame.

Hi Jim,

Sorry I never replied to your post before but too busy.. Have you had any success yet with the problem we are having. Since I last posted I have had to re-install PD10 three times (very Tedious) I tried all the solutions that you have to no avail!!! so please anyone refrain from pointing me to previous solutions that have been posted before. it's a shame that a program that is so good when working frustrates the life out of me. video editing is a time consuming job in itself to get the right effect but having to re-install over and over again makes me think like you, time to migrate!!!!!!

Well Geoff,
I hate to say it, but in my experience, Cyberlink tech support has been a real downer. You know that numerous times I have tried to install, reinstall, send diagnostic files, etc. To no avail. Now, PowerDirector 10 upgrade won't even install!!!
When I try, I get the error that it can't find the transformations path (and it gives the path it expects) and will not install. Even though I checked the path and the path and file it is looking for IS there, what do I get from tech support? Send us the build and version number of PDR9 and send us a screenshot of the upgrade file which shows the number of bytes. WHY does this irritate me? I had already sent them the version and serial number of PDR9. WHY didn't they have it? Does the left and right hand know what they are doing. Is there any continuity of tech support.

In the meantime, I have been using Corel's Video Studio Pro X4 Ultimate. Although not as good as Powerdirector (it is a little slower as it is a 32bit program) and ain't half bad and does most of the things PowerDirector does, albeit in a different manner. Once you get used to using it, it really is quite good. AND, MOST IMPORTANTLY, IT HAS RUN FLAWLESSLY AND I HAVE NEVER HAD TO REINSTALL OR CALL TECH SUPPORT EVEN ONCE. I still keep PowerDirector 9 on the computer in the hope that they figure out the problem with the upgrade, for PowerDirector 9 runs great and there are a couple of things I might want to do on it.

Take care Geoff

I'm sending Power Director 10 back and going back to version 9! I give CyberLink tech support a 0-10.

Hi Loomis ,
Please provide your customer online support ticket number. I will ask Customer Support (Head Office) to look up the data and perhaps contact you. In the meantime you could post your issue as a NEW TOPIC, http://forum.cyberlink.com/forum/jforum.page?module=posts&action=insert&forum_id=99

I do not want to interfere with you obtaining a refund - the 30 days etc

Hi jimgansett,
I would like to know why you are still in the same position you were when I was last here on this thread, not good at all. I'll email CyberLink to see what's happened and get back to you.

Dafydd

Its not a new topic so why have a new thread? I'm surprised this version made it through testing without these install issues being identified.

Hi Loomis,
I know the issue isn't "new". So you know why I asked, please read a guide: http://forum.cyberlink.com/forum/posts/list/13638.page

Forum Moderator

Well, we finally got PwerDirector 10 upgrade to install. Had to run some type of "cleaner" program to make sure that all traces of the old installation were gone. And, so far, PDR10 is working, but as I told tech support, I will not close the ticket because the problem has always been that it installs, works, and then for no apparent reason, stops working. I wonder if PDR10 code is installing in a place and is being overwritten by something. I don't know.

BUT... after reinstalling PDR10, I tried to install the two content paks that came with the upgrade I downloaded. AND... you guessed it.... they wouldn't install.!!!!! It said the content pak was already on my computer and do I want to uninstall it. Well, I stopped the installation and checked with the windows control panel and the content paks DID NOT show up on the list!.
So, I went back and when the content pak installer asked if I wanted to uninstall the old content pak before installing the new, just to see what would happen, I said yes, and then I got the dreaded ....can't find the transformation paths....again. AHHHHHHH Maybe they have a "cleaner" for the content paks.

It seems that PDR10 has some kind of problem based on what I read in the forum. There are at least 4 of us with similar experiences here on the forum. Who knows how many have problems who don't use the forum.

As I have said, PowerDirector is a great program. Unfortunately for some of us, we are having problems with PDR10. Yet PDR9 has run great for us. Go figure.

Hi Jim & Loomis

Hope you managed to get to the bottom of this problem because I haven't! must have installed and followed all the procedures suggested to no avail.

I have cleaned the registry every time un-installed quicktime and re-installed cyberlink versions of it although other people do not seem to have a problem with quicktime.

I am sure we are not alone and some members are just following the thread and not posting.

reports and files sent to Support ticket number CS001111478

I hope you don't mind but but I also quoted your ticket numbers as well in the hope they can find some common link.

Cheers and thanks for posting

Take care

Geoff