Quote
Powerdirector18を使用しています。
メニューデザイナー起動 → タイトル/チャプターメニュー画面にてナビゲーションボタン配置のレイアウトでディスクを作成。BDプレーヤーにてナビゲーションボタンを選択した際に、ボタンの下にライン(選択していることが分かる印)が出る時と出ない時があります。マーカー(下線)がどうしても出ない時もあるのですが、どこの設定を確認するのかが分かりません。なお、プレビューおよびPCでの再生時には下線が出ています。
本件について詳しい方おられましたらご教示いただきたくお願い致します。
This means that the pc monitor that you are using has a different aspect ratio from the TV and BD setup. PD18 was meant to be used with an aspect ratio of 16:9 when creating menus with Menu Designer.
The TV should have an aspect ratio of 16:9 and not 4:3. The BD player settings must be wide screen 16:9, and not letterbox, Pan and Scan, or 4:3 to get the menus to work correctly.
See these posts for users that deviate from the aspect ratio of 16:9 for creating BD or DVD:
https://forum.cyberlink.com/forum/posts/list/97526.page .You have to use PowerDirector 8 or earlier to create 4:3 menus that work correctly with BD. There are none in the DirectorZone.
これは、使用している PC モニターのアスペクト比が TV および BD セットアップと異なることを意味します。 PD18 は、Menu Designer でメニューを作成するときに、アスペクト比 16:9 で使用することを意図していました。
テレビのアスペクト比は 4:3 ではなく 16:9 にする必要があります。 メニューを正しく機能させるには、BD プレーヤーの設定をワイド スクリーン 16:9 にする必要があります。
BD または DVD を作成するために 16:9 のアスペクト比から外れたユーザーについては、これらの投稿を参照してください:
https://forum.cyberlink.com/forum/posts/list/97526.page .PowerDirector 8 以前を使用する必要があります。
これで問題が解決するかどうかお知らせください。